Filter
Top Products
L-NH2300 Bracket
Typical mounting on OUT-SWINGINGnarrow frame door
GIANNI INDUSTRIES, INC.
Copyright 2008Gianniindustries, inc.Allrights reserved.
DM-CA-L-NH2300 Ver.A Publishedon 2008.06.16
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomer satisfaction.
&
Unit:mm
Application for the Electromagnet:
EM-NH2300 Series
Magnet
Door
Frame
Door
Leaf
A
Out-swinging
"L" brackets
Mounting Plate
EM-NH2300
1
4
2
5
3
6
Drill an 8 mm hole
through door, from
sexnut bolt side only,
enlarge the 8mm hole to
16mm.
Drill an 6.8 mm dia.
Hole and tap for
M8x12.5thread.
Drill an 8 mm hole thru
door from sexnut bolt
side of door, drill
12.7mmhole, 36mm in
depth.
Fold the mounting template along
the dotted line to a 90-degree angle.
Close the door, place the template
against the door and frame.
Drill three holes in the door as
indicated onthe template.
Turn on the power of EM-Lock, and
let the armature plate bonds to the
EM-lock. Adjust the position
between the L bracket and the
door frame.
Once the position is correct, use the
screws to permanently mount the L
bracket on the door frame.
Test the unit. Insert the anti-
tamper caps into the mounting
screw accessholes.
16mm8mm
Hollow MetalDoor
6.8mm for M8-1.25 thread
Reinforced Door
12.7mm8mm
Solid Door
36mm
Power Power
Finish
L-150, L-EM150...
L-300,L-10001ST...
L-750, L-350,L-400...
L-500,L-600...
38mm
42mm
48mm
60mm
300 LBS
Magnet Grade Option Brackets
600 LBS
800LBS
1200 LBS
ValueA"
The A value in the table below for each
bracket to mount on the door frame,
shows the minimum requirement width of
Lock the armature plate and L
bracket first. Put the electromagnet
into thearmature plate second.
500
500
500
30
5
48
25
45.5
25
No. 13,Zhong Sing Road,Tu-Cheng Industrial Zone,
Tu-Cheng City,Taipei, Taiwan 23678
Tel: 886-22267 7986 /Fax: 886-2 22679876
E-Mail: info@gianni.com.tw
Website: gianni.tw