Filter
Top Products
L-600 Bracket
Typical mounting on OUT-SWINGINGnarrow frame door
GIANNI INDUSTRIES, INC.
Copyright 2008Gianniindustries, inc.Allrights reserved.
DM-CA-L-600 Ver.C Publishedon 2008.05.29
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomer satisfaction.
&
Unit:mm
Application for the Electromagnet:
10010ST , GL-1200S series
Magnet
Door
Frame
Door
Leaf
A
Out-swinging
"L" brackets
1
4
2
5
3
6
Drill an 8 mm hole
through door, from
sexnut bolt side only,
enlarge the 8mm hole to
16mm.
Drill an 6.8 mm dia.
Hole and tap for
M8x12.5thread.
Drill an 8 mm hole thru
door from sexnut bolt
side of door, drill
12.7mmhole, 36mm in
depth.
Fold the mounting template along
the dotted line to a 90-degree angle.
Close the door, place the template
against the door and frame.
Drill three holes in the door as
indicated on the template.
Turn on the power of EM-Lock, and
let the armature plate bonds to the
EM-lock. Adjust the position
between the L bracket and the
door frame.
Once the position is correct, use the
screws to permanently mount the L
bracket on the door frame.
Test the unit. Insert the anti-
tamper caps into the mounting
screw access holes.
16mm8mm
Hollow Metal Door
6.8mm for M8-1.25 thread
Reinforced Door
12.7mm8mm
Solid Door
36mm
Power Power
Finish
Use the Allen wrench to tighten the
screws into the L bracket.
220
68
47
220
75.5
41
7
L-150, L-EM150...
L-300,L-10001ST...
L-750, L-350,L-400...
L-500,L-600...
38mm
42mm
48mm
60mm
300 LBS
Magnet Grade Option Brackets
600 LBS
800LBS
1200 LBS
ValueA"
The A value in the table below for each bracket to
mount on the door frame, shows the minimum
requirement distance of the door frame for
different electromagnetic lock model.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw