Filter
Top Products
Statement
Specifications
GIANNI INDUSTRIES, INC.
Copyright 2008Gianniindustries,inc.Allrightsreserved.
DM-CA-GL600-S Ver.C Publishedon2008.05.12
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
Magnet
Armature
(OnPower)
When the power is switched off, the holding force will be
discontinuity and the bolt was installed in armature will pop
Regular Installation
UniqueAnti-Residual design
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
This series of Waterproof Magnetic Lock is made with epoxy
potting compound and is protected by this compound. Also,
GEM Waterproof Series Magnetic Locks have been proved to
have withstood a water resistance as established in
accordance with the test procedures of IPX7, IPX8 through a
trusted third party. Therefore users need not worry that the
lock will be rusted or sparked, if the lock is using in outdoor
applications and installing in confined space where any
inflammable gas.
GL600-S
Mini Surface Electromagnetic Lock
GL-600S mini surface water-proof Electromagnetic Locks
design with no mechanical parts but magnetic force to secure
and release the doors, suitable for use in areas which required
access controlled or egresssuch asexit door.
The Electromagnetic Locks are totally sealed in an epoxy
filled stainless steel case for water-resistant and vandal-
resistant purpose. A threaded conduit fitting ensures weather
resistant protection of the wiring therefore it is ideal for indoor
and outdoor applications, even in severe weather.
We offers up to 600 pounds holding force with 12V DC
power input (24VDC or 12/24V DC dualinput voltage available
by special order),and with the full range of optional brackets, it
can be installed on all type of door frames such as Hollow,
Wooden door. It is the best choice for electronic security
industry and system integrators.
VoltageTolerance:15%
Current Draw: 508mA@12Vdc (attemperature 20C)
Operating Temperature: -10~55C )14~131F(
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when thepower ison):
<current temperature +20C
Holding Force: 600 lbs)272 Kg(
Dimensions:
Magnet:(L) 203, (W) 43, (D) 40 mm
Armature Plate:(L) 159, (W)41, (D)14 mm
Special Finishes for magnet and armature plate:Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 2.0 Kg
Magnetic bond sensor monitoroutput (GL600R-S)
(SPDT rated 0.25A@12V DC), remotely monitorsthe door
lock or unlock status. (N.C. Output--Dooropened; N.O.
Output--Door closed)
(Furthernotice for diverseinput voltage onspecial orderrequirement)
Fire Exposure and Hose Stream Tests were conducted in
accordance with the standard, "Positive Pressure Fire Tests of
Door Assemblies," ANSI / UL 10B and 10C, uniform building
code standard UBC 7-2(1997).
No.13, Zhong SingRoad, Tu-Cheng IndustrialZone,
Tu-ChengCity, Taipei, Taiwan23678
Tel:886-2 2267 7986/ Fax: 886-22267 9876
E-Mail:info@gianni.com.tw
Website:gianni.tw