Filter
Top Products
Statement
Specifications
GIANNI INDUSTRIES, INC.
Copyright 2008Gianniindustries,inc.Allrightsreserved.
DM-CA-GL-1200 Ver.C Publishedon2008.05.12
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
UniqueAnti-Residual design
Whenthere isno power,there willbe noholding force,and thepush-offbutton will
pop out immediately, to release the Electromagnetic Lock and theArmature Plate
fornoresidualmagnetism.
Magnet
Armature
(PowerOff)
Magnet
Armature
(OnPower)
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
The Electromagnetic Locks are totally sealed in an epoxy
filled stainless steel case for water-resistant and vandal-
resistant purpose. Athreaded conduit fitting ensures weather
resistant protection of the wiring therefore it is ideal for indoor
and outdoor applications, even insevere weather.
Wel offers up to 1200 pounds holding force with 12V DC
power input (24V DC or 12/24V DC dual input voltage
available by special order), it is the best choice for electronic
security industry and system integrators.
VoltageTolerance:15%
Current Draw: 460mA@12Vdc (at temperature20C)
Magnetic bond sensor monitor output(GL-1200R)
(SPDT rated 0.25A@12V DC), remotely monitorsthe door
lock or unlock status. (N.C. Output--Dooropened; N.O.
Output--Door closed)
Operating Temperature: -10~55C )14~131F(
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the poweris on):
<current temperature +20C
Holding Force: Up to 1200lbs )545Kg(
Dimensions:
Magnet:(L) 202, (W) 62, (D)40 mm
Armature Plate:(L) 185, (W) 62,(D) 16mm
Special Finishes for magnet andarmature plate:Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 4.8 Kg
(Furthernotice for diverseinput voltageon special orderrequirement)
GL-1200
Gate Water-Proof Electromagnetic Lock
WaterproofTest:
ReferencetoIEC60529Edition2.1:2001-02-IPX7
This series of Waterproof Magnetic Lock is made with epoxy
potting compound and is protected by this compound. Also,
GEM Waterproof Series Magnetic Locks have been proved to
have withstood a water resistance as established in
accordance with the test procedures of IPX7, IPX8 through a
trusted third party. Therefore users need not worry that the
lock will be rusted or sparked, if the lock is using in outdoor
applications and installing in confined space where any
inflammable gas.
No.13, Zhong SingRoad, Tu-ChengIndustrial Zone,
Tu-ChengCity, Taipei, Taiwan23678
Tel:886-2 2267 7986/ Fax:886-2 2267 9876
E-Mail:info@gianni.com.tw
Website:gianni.tw