Filter
Top Products
Statement
Features
Specifications
The electromagnet lock is an important mounting
plate design breakthrough. The mounting plate is designed
with a well engineered sliding mechanism that makes
electromagnet considerably easy to clasp the mounting plate
to allow security of use and maximize the ease of installation.
Therefore, even if used for longer periods, the tricky
innovation in its design will prevent the electromagnet of
being fallingwhen thescrew are looseningup .
EM-NH600
GIANNI INDUSTRIES, INC.
No.306-1, HsinShu Road,Hsin Chuang,Taipei,Taiwan 242
TEL: 886-2-22069929 FAX:886-2-2204 6632
E-Mail: info@gianni.com.tw
Website:gianni.tw
Copyright©2008Gianniindustries,inc.Allrightsreserved.
DM-CA-EM-NH600 Ver.D Publishedon2008.08.18
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
GP001
Operating Features
EM-NH600M-TD: Re-lockingtime delay
Relocking Time Delay Switch ensures the
automatically turns to lock mode after the
door is closed properly and it can be
adjustedfrom0to90 seconds.
lll
N.O.
COM.
N.C.
Power
Input
SPDTrelay
3A@12VDC
TimerAdjust
Shorten
Trigger
EM-NH600M: Bond sensoroutput &Status LED
Bond sensor is used to indicate the door status as
in a locked or unlocked condition. is a
visual feedback for user to give the true status of
the lock at any time. Green light indicates the door
is insecure (unlocked) and the Red light is
indicatesthedoorissecure (locked).
Status LED
Bondsensormonitoroutput: SPDTrated:3A@12VDC
Patent:
ZL200620122522.X
Nr.202006012052.1
M308308
GB0616099.8
0607229(France)
Special Mounting Plate design
EM-NH600
Mini Electromagnetic Lock
MOV provides spike and surge protection.
Automatic relocking time delay
Magnetic bond sensor monitor output.
Bi-color LED indicates lock/unlock status.
Anodized aluminum housing.
Groove template & housing for easy installation.
Dual voltage 12 or 24 VDC selectable
Anti-Residual magnetism designed.
Complete mounting hardware included.
().
Voltage Tolerance: ±15%
Current Draw: 500mA@12Vdc 250mA@24Vdc
at 20 degree centigrade
Operating Temperature from -10 to 55 degree
centigrade
Humidity: 0~95% non-condensing.
Holding Force: Up to 600 lbs (272 Kg)
Dimensions:
Magnet:(L) 250, (W) 46, (D) 25 mm
Armature Plate:(L) 185, (W) 38, (D) 12 mm
Mounting Plate:(L) 250, (W) 25, (D) 5 mm
Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 2.0 Kg
Magnetic bondsensor monitoroutput (SPDTrated
3A@12V DC),remotely monitorsthe doorlock or
unlock status.
Status LED:Lights GREEN whenthe dooris
unlocked, lightsRED whenthe dooris locked.
Automatic relocking timedelay: 1~90 seconds.
;
()
Fastenthe mountingplateon
the site then install
electromagnet lock with
power lead cable through
mountingplateslothole.
Forassemblingthemounting
plate and the electromagnet
lock into the groove, please
make the mark on the
mounting plate and the mark
on the electromagnet lock
itself to be a straight line for
alignment. Either aligning
from left side or from right
sideisfeasible.
Slide the electromagnetic
lock to fit with the mounting
plate as the drawing. Once
the correct position is
encountered, use the Allen
Wrench to fasten the fixing
screws throughthe bottomof
the electromagnet lock into
themountingplate.
After the electromagnet
firmly assembled with the
mounting plate, use the
screws to fasten the lock on
thesitepermanently.
Cable