Gianni Industries EM-NH500 Series Door User Manual


  Open as PDF
of 1
 
LZ-NH500NAU Bracket
Typical mounting on IN-SWINGING door
GIANNI INDUSTRIES, INC.
Copyright 2008 Gianniindustries, inc.All rightsreserved.
DM-CA-LZ-NH500NAU Ver.A Published on2008.08.04
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
&
Application for the Electromagnet:
EM-NH500 Series
Unit:mm
Minimal:75mm
L-Bracket
Z-Bracket
In-Swinging
Frame
Door
Armature
2
Tighten theelectromagnetic lock
on theLbracket byusing the
fixing screw.
1
Find amounting locationon the
door framefor theLbracket. Make
sure thatthe dooris still closeable.
6
Close thedoor. Measure thecorrect
position bybringing thearmature
plate closeto thecontact surface of
the electromagneticlock.
7
Turn onthe powerof EM-Lock,
and letthe armatureplate bonds
to theEM-lock.Adjust theposition
between theZ bracketand the
door frame.
Finish
Once theposition iscorrect,
use thescrews topermanently
mount theZ bracketon the door
frame.
4
Insert theguide pinsinto the
armature plate.Put onerubber
washer betweenarmature plate
and theZ bracket.
5
3
Assemble theZ bracket,and make
sure thatthe Zbracket is adjustable.
Closing thecover onbracket.
Power
267
143
75
48
267
75
LZ-NH500NAU
EM-NH500
No. 13,Zhong SingRoad, Tu-Cheng IndustrialZone,
Tu-Cheng City,Taipei, Taiwan23678
Tel: 886-22267 7986/ Fax:886-2 2267 9876
E-Mail: info@gianni.com.tw
Website:gianni.tw