Filter
Top Products
Statement
Dimension
Specifications
GIANNI INDUSTRIES, INC.
Copyright 2008Gianniindustries,inc.Allrightsreserved.
DM-CA-EB-300 Ver.E Publishedon2008.10.20
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
Unit:mm
EB-300
Surface Mount Electric Dropbolt
EB-300
EB-300VGL
Fail-Safe Version (Powerto Lock)
Power Input:12 VDC
VoltageTolerance: ±10%
Current Draw:
Pull in:0.9A, Holding:0.3A@12V DC
at temperature20
Door Positionstatus output(Reed rated0.25A@30VDC)
indicates dooropened orclosed status.
Operating Temperature: -10~+45
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the poweris on):
<current temperature +20
Tested to 500000cycles.
Auto-relocking Time Delay :0, 3,6 ,9seconds
Weight (Approx.):
EB-300: 1.1 Kg
EB-300VGL: 1.7 Kg
(C
C
C
32
14
3
6
2
56
166
2
The EB-300 electric dropbolt is designed for
surfacemount application and the EB-300VGL is
designed for frameless glass door and glass wall
applications.
Special designed solenoid for strength and long life
operating lifetime withguaranteed 500,000operations.
Long life solenoids
Solid bolt for superior strength
Greater security isprovided by the 13.5mm diameter(
solid stainless steel bolt with hardened magnet
core, which has resistant to metal cutting saws. The bolt also
rotates freely, making attempts to tamper or cut extremely
difficult.
16mm
bolt throw)
The door locking delay is the time between the door being
closed and the bolt engaging . This can be set to up to 9
seconds at 3second intervalsby adjustingthe jumpers.
Lock Delay Settings
0 seconds 3 seconds 6 seconds 9 seconds
Auto Relocking Timer Setting
Clamp Design
When the bolt is extended to keep the door locked, it draws
only 0.3A in a holding mode down from 0.9A while the bolt is
retracted. This design both protects the power supply and
extends the lifeof the electric dropbolt.
Pull in
Holding
Current Draw (mA)
Time (seconds)
Smart Circuitry
The vandal resistant circuitry means the door close sensor
can't be fooled into projecting the electric dropbolt unless the
door is actually closed. The reed sensor automatically
disconnects after the bolt is projected to enhance security of
the lock.
Sensor
Vandalresistant
circuitdesign
No.13, Zhong Sing Road,Tu-Cheng Industrial Zone,
Tu-ChengCity, Taipei, Taiwan 23678
Tel:886-2 2267 7986 /Fax: 886-2 2267 9876
E-Mail:info@gianni.com.tw
Website:gianni.tw