Filter
Top Products
GIANNI INDUSTRIES, INC.
Copyright 2008Gianniindustries,inc.Allrightsreserved.
DM-CA-DG-101 Ver.C Publishedon2009.02.19
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
Features
Statement
DG-101
Digital Keyless Entry System
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Specifications
DG-101-BA
DG-101-WI
Unit:mm
Operating Voltage: 12~24Vdc
Current Draw:Average 15mA,Peak 60mA@12Vdc
Input: request-to-exit, timeout reedswitch contact
Output: Dualrelays, N.O./N.C./Com.Output (freevoltage
contact)
Relays Rating: 2AMAX @30Vdc , 0.4A@120Vac
RelayActivation Time:(*100,*200(
Strike Time: 1~99 seconds
Strike mode:Access Timeror Latch
Memory Volume: 49+50 PIN codes
Relay 1 is controlledby 001~049user slots
Relay 2 is controlledby 050~099user slots
PIN codes: 5 digitcodes only
Operating Temperature: -20~+70C
Ambient Humidity: 5~95% relativehumidity non-condensing
Factory Master Code: 12345
Invalid PIN Lock-out: The systemwill shutdown for60
seconds while 32 codesof incorrectlyMaster Codesenrolled
or PIN codes attempted(Nonebeeper signalof keypad
activations)
EPROM:Non-volatile memory,System willretain all
programs and codes aftera total loss of power.
Allows up to 49+50 PIN codes
Dual relays output for multi-control
Door Reed Switch Input for Anti-Trailing
Fully Programmable via keypad and master code
3 LED display with audible indication
Non-Volatile Memory
Invalid PIN Lock-out
ABS housing
With vandal resistant screws
ABS or optional luminous keypads
The is a dual relay digital code-operatedfor access
control keypad with up to 49+50 individual user PINs, user
access PINs ensure that all functions controlled to authorized
persons only. The door reed switch Input is used to time out
the timer when door is moved forAnti-Trailing. It's designed to
mount on any standard-single-gang electric wall box or on the
surface of an interior wall.
Logical memory can prevents unauthorized persons from
gaining PIN code entry by trial and error, The system will shut
down for 60 seconds while 32 codes of incorrectly Master
Codes enrolled or PIN codes attempted None beeper signal
of keypad activations .
DG-101
（
）
70
114
40
70
114
10
Surface mounting Installation:
SMB-101-WI SMB-101-BA ABS
housing is optional for surface
mount.
SMB-101-BA
SMB-101-WI
No.13, Zhong SingRoad, Tu-Cheng IndustrialZone,
Tu-ChengCity, Taipei, Taiwan23678
Tel:886-2 2267 7986/ Fax: 886-22267 9876
E-Mail:info@gianni.com.tw
Website:gianni.tw