Filter
Top Products
GIANNI INDUSTRIES, INC.
Copyright 2008Gianniindustries,inc.Allrightsreserved.
DM-CA-DG-100 Ver.D Publishedon2008.05.06
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
Features
Statement
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Specifications
Unit:mm
Split of controller and keypad for high security
5 (or 4) digit codes
Allows up to 99 PIN codes
Deftly dimension for narrow jamb
Random user codes for anti-peeping
Fully Programmable via keypad and master code
LED display with audible indication
Non-VolatileMemory
Invalid PIN Lock-out
Metal casting housing with vandal resistant screws
The is a split of keypad and controller board digital
code-operated for access control, allows up to 99 individual
user PINs, user access PINs ensure that all functions
controlled to authorized persons only.
The memory and relay circuitry are located on the
controller board which can be installed in a secure location up
to 50 Maway.
The system will shut down for 60 seconds while 30
codes of incorrectly Master Codes enrolled or PIN codes
attempted None beeper signal of keypad activations .Metal
die casting housing with vandal resistant screws to seize
every security measures ofthe unit.
DG-100
()
Split of units for
controller board and keypad inranging up to 50M bring out the
friendly system device for low cost but high security with anti-
tampering as wellas convenienceand reliability.
Advanced technology made of modern designed for deftly
dimension(keypad)featuring easy installation on to any door
stiles.
20
154
38.8
63
73
Controller Board
Keypad
DG-100
Split Digital Keypad Entry System
1
2
3
4
5
6
7
8
9
0
Operating Voltage: 12Vdc
Current Draw:Average 15mA, Peak70mA@ 12Vdc
Output: relays N.O. /N.C./ Com.Output (freevoltage
contact)
Relays Rated: 2AMAX@30Vdc 0.4A@ 120Vac
RelayActivation Time:
Strike Time: 1~99 seconds
Strike mode:Access Timer or Latch
User codes capacity:99 slots
PIN codes: 5digit codes(4 digitcodes availableby special
order)
Operating Temperature: -20~+70°C
Ambient Humidity: 5~95%relative humiditynon-
condensing
Factory Master Code: 12345(or 1234)
Invalid PIN Lock-out: Shut down for60 seconds.
Setting Mode delayTime: 60 seconds.
Pressed Key timedelay: 30 seconds.
EPROM: Non-volatile memory, System willretain all
programs and codesafter atotal lossof power.
Colour: Beige White
Cable Length: 2-meter(#22AWG)
Distance between the keypad and controller board:
Maximum 50 M(cable#22~26AWG).
；
No.13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-ChengCity, Taipei, Taiwan 23678
Tel:886-2 2267 7986 / Fax: 886-2 22679876
E-Mail:info@gianni.com.tw
Website:gianni.tw