Filter
Top Products
Retain for Future Reference
Thank you for purchasing the One For
All
Wireless Universal Garage Remote. Your
One For All Wireless Universal Garage
Remote (referred to as GDK throughout
the rest of the manual) is designed to
operate most garage door openers as well
as most gate openers manufactured after
1981*.
Your GDK will operate the following
manufacturer’s products:
Before getting started, you will need your
original garage door opener transmitter.
You will use the original transmitter during
the setup of the GDK. If you do not have
your original transmitter, please refer to the
“WHAT TO DO IF YOUR ORIGINAL
TRANSMITTER HAS TWO OR THREE
BUT-TONS OR IS LOST OR BROKEN”
section after setting up your password.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
l
Sears Craftsman (Most units)
Genie:
Model AR85 (9-Position Switch)
Model AR90 (12-Positions Switch)
Model SD9500 (12-Positions
Switch)
Stanley
Chamberlain (Most Units)
Linear
Moore-o-Matic
Multi-Code
Wayne Dalton
Lift-Master
Master Mechanics
Ambassador
Automatic DoorMan
Doorkeeper
Liftadoor
Multi El Mac
Raynor
Shima
Vemco
Crawford
Powerlift
Blue Max
EZ
Lift
Your GDK package contains the following
items:
.
1
-
One For All Wireless Universal
Garage Remote
.
1
-
Users Manual
.
1
-
9-volt
battery
.
2
-
1”
flathead
screws for mounting the
One For All Wireless Universal Garage
Remote
The GDK comes with one fresh 9-volt
battery. The battery is packaged inside the
battery compartment along with the two
1"
mounting screws, however, the battery is
not connected. To connect the battery:
1.
3.
Slide off the battery cover
and remove the battery and
two mounting screws.
Connect the battery.
Insert the connected battery
inside the battery
compartment and replace
the battery cover.
Smarthome.com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com