GE 681131065801 Fan User Manual


 
a
16" Deluxe Pedestal Fan User’s Guide
106570
106580
106590
e
For product service, call customer service at 877-207-0923.
Item Stock Number: UPC:
106570 (Gray) 681131065702
106580 (Blue) 681131065801
106590 (Brown) 681131065900
Maintenance
Always unplug cord before cleaning or disassembly.
Cleaning: IMPORTANT! DO NOT immerse electrical parts in water!
Disassembled grills may be immersed to be cleaned with a mild detergent
and water. Wipe all other parts with soft cloth moistened with water and
mild detergent only. DRY ALL PARTS COMPLETELY BEFORE
REASSEMBLING AND RECONNECTING TO POWER SOURCE.
Lubrication: Motor is permanently lubricated.
For Your Safety
The AC power plug is polarized (one blade is wider than
the other) and only fits into AC power outlets one way.
If the plug won't go into the outlet completely, turn the
plug over and try to insert it the other way. If it still won't
fit, contact a qualified electrician to change the outlet,
or use a different one.
Do not attempt to bypass this safety feature.
WARNING:
To prevent fire or electrical
shock hazard,
do not expose this product
to rain or moisture.
Assembly: Stand
For tall height (See drawing at right.)
1. Place base flat on floor.
2. Push tube
with
connector into base,
leaving connector end up.
Turning tube while pushing will assure
tube is fully seated in base.
3. Push tube
without
connector onto
other tube, over connector.
Turning tube while pushing will assure
tube is fully seated on connector.
Important Safety Instructions
This fan is for residential use only. It is not intended to be used in
commercial or industrial settings.
1. Never insert fingers, pencils, or other foreign objects through the grill.
2. Disconnect fan when moving it from one location to another.
3. Be sure that the fan is on a stable surface when operating to avoid the
chance of it overturning.
4. Disconnect fan when removing grill for cleaning. Reinstall grill before
reconnecting to power supply.
5. WARNING: To reduce the risk of fire, electric shock or personal injury:
a) Do not use this fan with any solid-state speed control device.
b) Unplug fan before cleaning or servicing.
c) If you disassemble your fan, completely reassemble before plugging
into outlet.
d) Do not use this fan in a window. Rain may create an electrical hazard.
For short height (See drawing at left.)
1. Place base flat on floor.
2. Push tube
without
connector
into base, leaving notch end up.
Turning tube while pushing will
assure tube is fully seated in base.
Rev. B 11/00 2085335 1
base
notched end
tube
with
connector
base
tube
without
connector
notched end
SEE MARKING ON BOTTOM / BACK OF PRODUCT
THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE MOTOR
COVER (OR BACK). NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
READ AND SAVE THESE INSTRUCTIONS
a
Rev. B 11/00 2085335 1
Para servicio de productos, llame al departamento de servicio al cliente al 877-207-0923.
Número de
producto
: UPC:
106570 (Gris) 681131065702
106580 (Azul) 681131065801
106590 (Marrón) 681131065900
Mantenimiento
Siempre desenchufe el cordón antes de limpiar o desarmar el aparato.
Limpieza: ¡IMPORTANTE! ¡NO sumerja los componentes eléctricos en
agua! Las parrillas desarmadas pueden sumergirse en una solución de
agua y un detergente suave para la limpieza. Limpie todas las demás
piezas únicamente con un trapo suave humedecido con agua y un
detergente suave. SEQUE TODAS LAS PIEZAS COMPLETAMENTE
ANTES DE REARMARLAS Y CONECTAR EL APARATO A LA FUENTE
DE ALIMENTACIÓN.
Lubricación: El motor ha sido lubricado permanentemente.
Instrucciones Importantes de Seguridad
Este ventilador es sólo para uso residencial. No está destinado para uso
comercial o industrial.
1.
Nunca inserte los dedos, lápices u otros objetos extraños a través de la parrilla.
2. Desconecte el ventilador para pasarlo de una ubicación a otra.
3. Asegúrese que el ventilador se encuentre sobre una superficie estable
durante el uso para evitar que se vuelque.
4. Desconecte el ventilador antes de retirar la parrilla para la limpieza. Vuelva
instalar la parrilla antes de volver a conectar el ventilador a la fuente de alimentación.
5. ADVERTENCIA: Para reducir el riesgo de incendios, electrochoques o
lesiones personales:
a) No use este ventilador con ningún dispositivo de estado sólido
para control de velocidad.
b) Desenchufe el ventilador antes de limpiarlo o darle servicio.
c) Si usted desarma su ventilador, vuelva a armarlo completamente
antes de enchufarlo en el tomacorriente.
d) No use este ventilador en una ventana. La lluvia puede causar un
riesgo eléctrico.
Ventilador de lujo tipo Pedestal de 16 pulg
Guía del Usuario
106570
106580
106590
e
Para su seguridad
El enchufe de alimentación CA es de tipo polarizado (una de sus
cuchillas es más ancha que la otra) y sólo se encaja en los
tomacorrientes CA en un sentido. Si el enchufe no encaja bien en el
tomacorriente, inviértalo e intente insertarlo en posición invertida. Si
aún no encaja bien, solicite que un electricista calificado reemplace el
tomacorriente, o utilice un tomacorriente distinto.
No intente burlar esta característica de seguridad.
LEA Y GUARDE ESTAS INSTRUCCIONES
ADVERTENCIA:
Para evitar los incendios
y el riesgo de electrochoques,
no exponga esta producto
a la lluvia o humedad.
Para altura baja (Vea el dibujo a la izquierda.)
1. Coloque la base plana en el piso.
2. Empuje el tubo sin conector en la base,
dejando el extremo con muesca hacia arriba.
El girar el tubo a medida que se lo empuja
asegura que el tubo quede plenamente
asentado en la base.
Armado: Pedestal
Para altura alta (Vea el dibujo a la derecha.
1. Coloque la base plana en el piso.
2. Empuje el tubo
con
conector en
la base, dejando el extremo con conector
hacia arriba. El girar el tubo a medida que se
lo
empuja asegura que el tubo quede
plenament
e
asentado en la base.
3. Empuje el tubo
sin
conector en el
otro tubo, sobre el conector. El girar el
t
ubo a medida que se lo empuja asegura
que el tubo quede plenamente asentado
en la base.
base
extremo con
muesca
tubo
con
conector
VEA LAS INDICACIONES EN EL FONDO / PARTE POSTERIOR DEL PRODUCTO.
EL RAYO CON
PUNTA DE FLECHA
DENTRO DEL
TRIÁNGULO ES
UN
SÍMBOLO
DE ADVERTENCIA
PARA AVISARLE
DE LA PRESENCIA
DE“VOLTAJE
PELIGROSO” DENTRO
DEL
PRODUCTO.
EL SIGNO DE
ADMIRACIÓN
DENTRO DEL
TRIÁNGULO ES
UN SÍMBOLO DE
ADVERTENCIA
PARA AVISARLE
DE INSTRUCCIONES
IMPORTANTES
QUE ACOMPAÑAN
AL PRODUCTO.
PRECAUCIÓN: PARA REDUCIR
EL RIESGO DE ELECTROCHOQUES,
NO RETIRE LA CUBIERTA
(O PARTE POSTERIOR) DEL
MOTOR. NO CONTIENE
COMPONENTES REPARABLES
POR EL USUARIO. SOLICITE
QUE PERSONAL DE SERVICIO
CALIFICADO REALICE LOS
TRABAJOS DE SERVICIO.
PRECAUCIÓN
RIESGO DE ELECTROCHOQUES
NO LO ABRA
base
extremo con
muesca
tubo
sin
conector