Falcon U108610-07 Stove User Manual


 
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
31
ArtNo.320-0020 Oven back fixing screws
Fig.9-4
Fit the new fan and reassemble in reverse order. Check
the operation of the oven.
5.3 To Change the Oven Element
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the oven inner back (see 5.1).
Remove the 2 screws from the top of the element and
the 1 from the bottom of the element (Fig.9-5).
Carefully lift the element out, disconnecting the
terminals connected to the element (noting their
positions).
If it is not possible to disconnect the leads in this way,
pull the cooker forward to gain access to the rear,
remove the screws securing the electric cover to the
back sheet, remove the cover and disconnect the
terminals from the rear.
Fit the new element and reassemble in reverse order.
Check the operation of the oven.
5.4 To Change an Oven Element Thermal Cut-out
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forwards to gain access to the cover
box. Undo the cover screws and lift clear. The cut-out
is located on the earth plate beside the oven element
connections. Disconnect the cut-out wiring. Undo the
xings that secure the cut-out to the earth plate and
remove.
Fit the replacement control and re-assemble in reverse
order.
5.5 To Replace an Oven Thermostat
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel and hotplate (see 1.1 & 2.1).
Open the oven door and remove the oven furniture.
Main Oven
For the right-hand oven, remove the thermostat phial
cover (2 screws). Unclip the thermostat phial from the
clips in the oven back. For the left-hand oven, pull
cooker forward to gain access to the cover box at the
rear of the cooker. Remove the 4 screws securing the
cover and lift clear.
Feed the thermostat capillary out of the oven.
Disconnect the wiring from the thermostat. Remove
2screws holding thermostat to mounting panel. Fit new
thermostat and reassemble in reverse order. Make sure
that the phial is clipped to the oven back with the phial
centrally positioned between the clips.
Check the operation of the thermostat.
Tall Oven
Open the oven door. Remove oven furniture. Remove
the oven inner back xing screws and remove the inner
back. Unclip the thermostat phial from the clips on the
oven back. From the top pull the thermostat capillary
up and out. Disconnect the leads and remove the
thermostat and phial. Reassemble in reverse order.
Check the operation of thermostat.
Element fixing screws
ArtNo.321-0005 Fan oven element
Fig.9-5