XS1B Aircraft Water Filter
Part No. EV941000
Premium Quality Water Filtration
Created for Use in Aircraft
XS1B Assembly
P/N EV941000 (1 pack)
BENEFITS
Improves aircraft water by reducing chlorine taste and odor •
and other off tastes and odors
Filters out dirt and other suspended matter•
Vessel made of durable “300 Series” stainless steel•
Designed for use with all Everpure D-Clor™ Cartridges•
FAA-PMA Approved•
INSTALLATION TIPS
To service, shut off inuent water supply, open service tap, •
remove the V-Band Clamp, and unscrew cartridge.
After replacing cartridge, air should be released from the top •
vent.
Flush the cartridges by running water through filter at •
full flow at the service tap for three minutes, or until
water runs clear.
OPERATION TIPS
Change cartridges as indicated on the cartridge data sheet.•
Always flush new filter cartridges at the time of •
installation.
INLET AND OUTLET CONNECTIONS
Bottom IN / Bottom OUT • Top Vent
Inlet and Outlet: 9/16-inch• — 18NF (3/8-inch tube union)
REPLACEMENT CARTRIDGES
All D-Clor™ cartridges reduce chlorine taste and odor, and •
other taste and odor while ltering out dirt and suspended
matter. See chart for different pressure drop characteristics.
In addition to reducing taste and odors, the 150GP cartridge •
inhibits limescale build-up. Limescale prevention is particularly
important in applications involving hot water heaters and
coffee makers.
150B D-Clor™
Replacement
Cartridge
P/N EV949812
(12 Pack)
150G D-Clor™
Replacement
Cartridge
P/N EV949000
(12 Pack)
150GP D-Clor™
Replacement
Cartridge
P/N EV949212
(12 Pack)
150GY D-Clor™
Replacement
Cartridge
P/N EV949012
(12 Pack)
0
5
10
15
20
25
0 0.5 1 1.5 2 2.5
FLOW RATE (GPM)
INITIAL PRESSURE DROP (PSI)
PRESSURE DROP CHARACTERISTICS
S1B Shell Only
S1B w/150G cartridge
S1B w/150GP cartridge
S1B w/150GY cartridge
S1B w/150B cartridge
FAA-PMA APPROVED