BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS
OPERATION TIPS
MR-20 Replacement Cartridge
Mineral Reduction Cartridge
MR-20 Replacement Cartridge: EV9273-69
MR-20 Replacement Cartridge: EV9273-69
Improves equipment life and performance by
removing at least 90%+ of all dissolved solids
using Reverse Osmosis Separation Technology
Especially useful on low capacity steamers,
warmers, small steam boilers and other
evaporative equipment that are not emptied each
day
Heating surfaces maintain peak heat transfer
efficiency, reducing cycle times and energy
consumption
Limits limescale build-up, which can cause
excessive machine downtime and maintenance
costs
Sanitary cartridge replacement is simple, quick
and clean. Internal filter parts are never exposed
to handling or contamination
Install vertically with cartridge hanging down
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Use piping materials suitable for high-purity
water after MRS System
Refer to Installation, Operation & Maintenance
Manual for cartridge flushing and RO start-up
Change MR Cartridge on a regular 24 month
preventative maintenance program
Change MR Cartridge when output capacity
diminishes by 15%, or when output pressure
becomes too low.
Always flush the MR cartridge at time of
installation and cartridge change
Proper pre-treatment is required to control MR
Cartridge (membrane) scale formation and/or
fouling.
- Raw water hardness in excess of 7 grains per
gallon should be softened to extend cartridge life
- The raw water may contain particulates and
the use of a pre-filter is recommended
Contact EVERPURE Technical Service for
pre-treatment recommendations
Mineral Reduction Cartridge for High TDS
Waters
Capacity: 21 Gallons per Day nominal
Ideal for:
Flash steamers, conventional steamers, cheese
melters, combi-ovens and coffee/espresso
machines
EV9273-69