Filter
Top Products
BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS
OPERATION TIPS
SR-X Feeder
Superior scale prevention and corrosion control
SRX Feeder: EV9798-45
SS-IMF Cartridge: EV9799-32
SRX Feeder: EV9798-45
SS-IMF Cartridge: EV9799-32
A complete system that effectively targets scale in
both hot and cold environments
Provides protection against equipment corrosion
A sophisticated blend of polyphosphate
compound represents an advancement in scale
inhibition
Patented design (patent no. 5,580,448) dispenses
a controlled amount of Hydroblend™ for
long-term protection and provides greater
effectiveness than standard phosphate treatments
SS-10 cartridge is more effective in higher
alkalinty/hardness/TDS/temperature
installations.
Clear bowl and cartridge make it easy to
determine when Hydroblend compound is
exhausted
System includes SR-X housing, SS-IMF
cartridge and Spacer
The SS-IMF is NSF Certified under
NSF/ANSI Standard 42 for material
requirements only
Choose a mounting location suitable to support
the full weight of the system when operating
Make sure to properly lubricate O-ring prior to
use
Use 3/4” water line (Optional reducer bushings
included)
Install vertically with bowl hanging down
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Deliming of equipment prior to application is
recommended, but not required
Inspect SS-IMF cartridge at least every 6 months
Replace SS-IMF cartridge before Hydroblend™
compound is completely dissolved
Pre-existing equipment scale may come loose and
clog equipment. Remove any loose scale to assure
satisfactory operation
For scale reduction applications
Provides scale reduction for ice applications
EV9798-45