Eureka HD3684A Vacuum Cleaner User Manual


 
PROBLEM SOLVING
NOTE: Turn OFF the power switch and unplug the electrical cord before ser vic ing.
PROBLEM CAUSE SOLUTION
7
Motor wonʼt start
Electric plug
Power switch not turned “ON”
Full paper bag
Hose
Front cover not latched
Full paper bag
Slip ring open
Hose
Internal safety thermostat trips
Cord connection at hose
Assembly or related
attachments
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Make sure power switch is “ON.”
Replace paper bag.
Remove any clogs from hose that
restrict airfl ow, then try again.
Push front cover until it latches fi rmly.
Replace paper bag.
Rotate slip ring on wand until hole is
covered.
Remove any clogs from hose that
restrict airfl ow, then try again.
Unplug cleaner and check for obstruc-
tions in hose, wands and at tach ments.
Check for full paper bag.
Clean/replace motor fi lter.
Check powerhead and hose plugs for
proper connection.
Call 1-800-282-2886 between 7:00
AM–8:00 PM central standard time,
Monday through Saturday.
Know the model number and serial
number when you call.
No suction at end
of hose
Reduced suction
Cleaner shuts off
General questions
PROBLEM CAUSE SOLUTION
PROBLEM CAUSE SOLUTION
proper connection.