1/9
ABCDEFGHI J
1
2
3
4
5
6
7
8
1/2"
7.825
198.755
2.088
53.023
30.125
765.175
12.000
304.800
.888
22.543
27.750
704.850
4X Ø .500
PILOT HOLE
12.700
PILOT HOLE
X
OUTLINE OF 9"
VERTICAL LIFT SYSTEM
MOUNTING HEIGHT EQUATION FOR SITTING
APPLICATIONS:
52.00 (1321MM) - X = H
X = DISTANCE FROM THE TOP OF THE MONITOR
SCREEN TO THE CENTER OF THE MOUNTING
SCREW PATTERN (SEE PICTORIAL)
H = HEIGHT FROM FLOOR TO MOUNTING HEIGHT
LINE (ABOVE)
MOUNTING HEIGHT LINE:
(OBTAINED BY SOLVING
EQUATION BELOW)
MOUNTING HEIGHT EQUATION FOR STANDING
APPLICATIONS:
67.50 (1715MM) - X = H
X = DISTANCE FROM THE TOP OF THE MONITOR
SCREEN TO THE CENTER OF THE MOUNTING
SCREW PATTERN
H = HEIGHT FROM FLOOR TO MOUNTING HEIGHT
LINE (ABOVE)
1. REFER TO THE MANUAL.
2. MEASURE THE DISTANCE FROM THE TOP OF THE MONITOR
SCREEN TO THE CENTER OF THE MOUNTING SCREW PATTERN.
3. DETERMINE ERGONOMICLLY CORRECT VIEWING HEIGHT BY
USING EQUATION ABOVE (OR BELOW).
4. MARK THE DETERMINED VALUE FOR H, ON THE WALL.
5. ALIGN MOUNTING HEIGHT LINE TO MARK ON THE WALL.
USING A LEVEL, LEVEL THE TEMPLATE, THEN TACK IN PLACE.
6. CLEARLY MARK THE POSITIONS FOR FOUR PILOT HOLES
INTO THE WALL.
7. DRILL THE FOUR PILOT HOLES.
H
H
ERGOTrON
SIZE
DWG. NO.
D
REV.
DATE
DRAWN
CHECKED
TITLE
C
888-122
MJS
1/21/99
MANUAL,VISUAL GUIDE,TEMPLATE,
TO MOUNT 9" VERTICAL LIFT SYSTEM
TO WALL
OBSOLETE
PART NUMBER
888-122
STATUS
888-122-01
ACTIVE - AS SHOWN
HCS
2
1
1/2"
5/32"
3/32"
3/16"
Ø 1/2" (12.8 mm)
1x
1x
1x
1x
1x
1x
1x
2x
2x 2x 1x
1x
1x
1x
1x 1x
1x
1x
8-32 x 1/4"
M4 x 6mm
M4 x 10mm
M4 x 20mm
M4 x 10mm
1/4-20 x 1-1/2"
4x 4x 1x 5x
4x 12x4x4x4x4x
User's Guide
CAUTION: Do Not remove cardboard spacer until instructed to do so.
WARNING: Because surfaces vary widely and the
ultimate mounting method is out of Ergotron’s control,
it is imperative that you consult with appropriate
engineering, architectural or construction professional
to ensure that your Ergotron mounting solution is
mounted properly to handle applied loads.
2.5mm
888-60-503-G-00 rev. B • 07/08
1x
StyleView® Vertical Lift, PATIENT ROOM
1/2"