Filter
Top Products
25
MAIN MENU
Beeper – Default is On. Turns audible
prompt on to indicate when a button is
pressed.
Cycle Humidier – Default if O. This
feature provides an option that reduces
the water usage by up to 50% when a
ow-through humidier is controlled by
the thermostat. It is recommended for
use on ow-through humidiers only.
When turned On, the humidier will
cycle to turn o for 10 minutes after it
has run for 10 minutes. The blower and/
or furnace will continue to run during
the humidier o period.
Auto Humidity Reduction – Default
is O. Prevents condensation from
forming inside the home when the
HVAC system is in heat mode. The Low
setting provides a minimum amount of
humidity reduction and the High setting
provides a maximum.
Main Menu