Filter
Top Products
13
ADVANCED
INSTALLER MENU
From the Home screen press the and buttons at the same time for
three seconds.
Press Enter button to save any changes and display the previous menu or
press Home to display the Home Screen.
Items on the Advanced Installer Menu are:
Communicating Devices – select system conguration options
Fault Status – indicates equipment faults that have been detected
USB Upload – select thermostat settings to be uploaded from a
pre-loaded USB
Thermostat Summary – indicates software version of thermostat
Heat Pump Lockout* – disable heat pump below a selectable temperature
(when using electric Aux heat)
Dual Fuel Setpoint* – disable heat pump below a selectable temperature
(when using fossil fuel Aux heat – dual fuel)
Aux Lockout* – disable Aux heat above a selectable temperature
Heat Cycle Rate – adjust the duration for a call for heating
Cool Cycle Rate – adjust the duration for a call for cooling
Humidity Display Adjust – o-set the humidity that is displayed
Installation Test – equipment test for communicating systems only
*May or may not appear in the list depending on the configuration of
the system
IMPORTANT: Allow up to 5 minutes for menu options to become available
after changing settings.
Advanced Installer Menu