Filter
Top Products
Cutout in
No. of
Countertop
1
1
/2" Dia.
U-Channel Quick-Clip
®
(1
1
/2" Radius
Faucet Minimum Ship.
Model Model
Overall Inside Bowl Corners)
Holes Cabinet Wt.
Number Number L W L W D L W 4" Centers Size Lbs.
LWR2522R LWRQ2522R 25 22 22 16 6
1
⁄8 24
3
⁄8 21
3
⁄8 1, 2, MR2, 3, 4 or 5 30 16
LWR2522L LWRQ2522L 25 22 22 16 6
1
⁄8 24
3
⁄8 21
3
⁄8 1, 2, MR2, 3, 4 or 5 30 16
GENERAL
Highest quality sink bowl seamlessly formed of #18 gauge, type
304 (18-8) nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 6-1/8".
Waste-All Cone: 2".
Coved Corners: 1-3/4" vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
Finish: Exposed surfaces are hand blended to a lustrous
highlighted satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 3-1/2".
Suffix “L” (left) or “R” (right) denotes waste disposer opening
located in left or right rear corner of bowl.
NOTE: Unless otherwise specified, sink is furnished with 3
faucet holes as shown.
These sinks comply with ANSI Standard A112.19.3M.
OPTIONAL ACCESSORIES
Rinsing Basket: LKRB1520 or LKERBSS.
Cutting Board: CB1713 or CBS1316.
Model LWR(Q)2522R3
SINK DIMENSIONS (INCHES)*
* Length is left to right. Width is front to back.
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2004 Elkay
(Rev. 3/04) 1-65F
www.elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
Lustertone
®
Single Bowl Waste-All
®
Sink
Models LWR2522 and LWRQ2522 Series
®
SPECIFICATIONS
Quick-Clip
®
Mounting System
U-Channel Type Mounting System
Model LWR(Q)2522L3