Filter
Top Products
GENERAL
Highest quality sink bowl seamlessly formed of #18 gauge, type
304 (18-8) nickel bearing stainless steel. Self-rimming.
CLASSROOM/INSTITUTIONAL SINK PACKAGES
Models DRKR(Q)2220C, DRKR(Q)2517C, DRKR(Q)3119C,
DRKAD(Q)2220C, DRKAD(Q)2517C and DRKAD(Q)3119C
feature a scratch and crack resistant stainless steel sink,
Contemporary Hi-Arc
®
faucet and No Lead Flexi-Guard
®
Bubbler. Package includes:
(1)
LK2439 Two-handle Contemporary Hi-Arc concealed
undermount faucet with 45° restricted swing spout and
aerator. Outlet height: 10"; Reach: 6-1/2". No spray.
(1)
LK1141A No Lead Flexi-Guard
®
Bubbler. Pushbutton valve
design bubbler meets ANSI and ADA requirements.
Designed so that water never comes in contact with lead-
containing materials. Flexi-Guard safety bubbler flexes on
impact to prevent accidental injury when getting a drink.
Built-in adjustable water volume control.
(1)
LK35 Duo strainer.
OTHER
DRKAD(Q)2220, DRKAD(Q)2522 and DRKAD(Q)3119 drain
opening is 3-1/2" and located centered left-to-right and off-
center front-to-back as illustrated.
All other drain opening sizes are 3-1/2" and centered in bowl as
illustrated.
Slotted hole allows for vandal-resistant faucet and bubbler.
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as shown (see back page).
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2004 Elkay
(Rev. 3/04) 1-21F
www.elkayusa.com
Lustertone
®
Single Bowl Classroom Sinks
and Sink Packages – Double Ledge
Models DRKR and DRKRQ Series
Models DRKAD and DRKADQ Series – A.D.A. Compliant
®
SPECIFICATIONS
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Both the faucet and the bubbler are classified by
Underwriters Laboratories Inc. to NSF/ANSI61 for
residential use.
U
L
®
Model DRKR(Q)2517C
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
Cutout in
Countertop
No. of 3
1
/2"
U-Channel Quick-Clip
®
Overall Inside Bowl
(1
1
/2" Radius
Faucet Holes Drain Opening Minimum Ship.
Model Model
L W L W D Corners)
(see back (see above Cabinet Wt.
Number Number A B C D E L W page) for details) Size Lbs.
DRKR2220C DRKRQ2220C 22 19
1
/2 13
1
/2 16 7
5
/8 21
3
/8 18
7
/8 4 Centered 27 22
†DRKR2220 †DRKRQ2220 22 19
1
/2 13
1
/2 16 7
5
/8 21
3
/8 18
7
/8 2, 2LM or 4 Centered 27 13
1
/2
DRKR2517C DRKRQ2517C 25 17 16 13
1
/2 7
5
/8 24
3
/8 16
3
/8 4 Centered 30 21
†DRKR2517 †DRKRQ2517 25 17 16 13
1
/2 7
5
/8 24
3
/8 16
3
/8 2, 2LM or 4 Centered 30 13
DRKR2522 DRKRQ2522 25 22 16 19 7
5
/8 24
3
/8 21
3
/8 2, 2LM or 4 Centered 30 16
DRKR3119C DRKRQ3119C 31 19
1
/2 22 16 7
5
/8 30
3
/8 18
7
/8 4 Centered 36 27
†DRKR3119 †DRKRQ3119 31 19
1
/2 22 16 7
5
/8 30
3
/8 18
7
/8 2, 2LM or 4 Centered 36 18
1
/2
DRKAD2220C DRKADQ2220C 22 19
1
/2 13
1
/2 16 ‡ 21
3
/8 18
7
/8 4 Off-Centered 27 22
1
/2
†DRKAD2220 †DRKADQ2220 22 19
1
/2 13
1
/2 16 ‡ 21
3
/8 18
7
/8 2, 2LM or 4 Off-Centered 27 13
1
/2
DRKAD2517C DRKADQ2517C 25 17 16 13
1
/2 ‡ 24
3
/8 16
3
/8 4 Centered 30 22
†DRKAD2517 †DRKADQ2517 25 17 16 13
1
/2 ‡ 24
3
/8 16
3
/8 2, 2LM or 4 Centered 30 13
DRKAD2522 DRKADQ2522 25 22 16 19 ‡ 24
3
/8 21
3
/8 2, 2LM or 4 Off-Centered 30 16
DRKAD3119C DRKADQ3119C 31 19
1
/2 22 16 ‡ 30
3
/8 18
7
/8 4 Off-Centered 36 25
†DRKAD3119 †DRKADQ3119 31 19
1
/2 22 16 ‡ 30
3
/8 18
7
/8 2, 2LM or 4 Off-Centered 36 19
* Length is left to right.Width is front to back.
† Unless otherwise specified, all sinks which do not have suffix “C” are
less fittings (no faucet, bubbler or drain), but are drilled for faucet, bubbler and drain as
illustrated.
‡ Available in 5-1/2", 6" or 6-1/2" depths.Please consult your sales representative for other depths or modifications.
SINK DIMENSIONS (INCHES)*
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.
These sinks comply with ANSI Standard A112.19.3M.