Earthquake Sound TW-25S Indoor Furnishings User Manual


  Open as PDF
of 1
 
Flush Mount Assembly Flush Mount Complete assembly Flush Mount Installation
Panel
Top Ring
Top Ring
Make sure that
the top ring and
bottom cup snap
when pushed
together
Twist on nut
until the
tweeter is
secured
Fasten the panel
clamp down from
behind the panel.
Panel
Mounting screws
Earthquake has provided two (2)
mounting screws to be used in
the Angle and Surface options
Panel Clamp
Top Ring
Surface Mount Assembly & InstallationAngle Mount Assembly & Installation
Push assembled tweeter through cut out hole
Cut diameter: TW-25S=2” (50.8mm), TW-35S=3” (76.20mm)
Panel
Bottom Cup
Bottom Cup
Bottom Cup
TW-25S & TW-35S Installation Guide
www.earthquakesound.com