Filter
Top Products
Save for future reference.
For more information, visit www.desatech.com
HFL300 SERIES BRICK LINER KIT
INSTALLATION INSTRUCTIONS
IMPORTANT: Read entire instruction sheet
before installing brick liner.
This brick liner accessory is approved for
use in Series 4 32" vent-free gas fireplaces
and fireboxes. Do not use brick liner ac
-
cessory in any other fireplace models.
The Brick Liner Kit contains the following:
• 1 - Rear Firebrick Panel
• 2 - Side Firebrick Panels
• 2 - Retainer Brackets
• 2 - #10 Screws
Tools required:
• Phillips Screwdriver
• 5/16" Hex Socket Wrench or Nut Driver
If any of these parts are missing or damaged,
contact dealer where you purchased this kit. If
they cannot supply original replacement parts,
either contact your nearest Parts Central or call
DESA Heating Products at 1-866-672-6040 for
information.
IMPORTANT:
Always handle firebrick panels
with two hands.
WARNING: Turn off, unplug,
and let fireplace cool before
installing brick liner. Only a
qualified service person should
service and repair fireplace.
NOTICE: You must remove log
base assembly before installing
brick liner.
1. To remove screen, lift screen up off the screws
in front of fireplace (see Figure 1).
Figure 1 - Removing Fireplace Screen
Screws
for
Mounting
Screen