Filter
Top Products
www.desatech.com
117437-01D 19
INSTALLING LOGS AND GLOWING
EMBERS
A 4 piece ceramic log set comes packed in-
necessary to unpack and assemble logs and
add hearth treatments. Follow steps under
Removing/Replacing Glass Door
access logs and burner.
Assemble logs and add burner treatments
as follows:
1. Position base log onto burner log mounts
(see Figure 31).
Figure 31 - Installing Logs
FIREPLACE INSTALLATION
Continued
Figure 32 - Applying Ember Material
Note: Cut out on bottom should t over
mounts and base log should be positioned
against rear panel.
2. Position holes on bottom of rear log over
pins on base log (see Figure 31).
3. Position top left log and top right log
onto rear log and base log as shown in
Figure 31.
pieces and place a single layer along the
full length of ember tray to hide bottom
edge of base log (see Figure 32).
5. Replace glass door and louver panels
(see Removing/Replacing Glass Door
page 18).
WARNING: The glass door
must be securely in place before
running this replace. Do not run
this replace if glass is missing
or broken.
Top
Right
Log
Top Left
Log
Rear
Log
Burner
Base Log
Rear Log
Stand
Burner
Pan
Log
Mounts
Ember
Tray
Ember
Material