5
A - Air cleaner
B - Four 1” eye-bolts
C - Four 1/4-20 flange nuts
D - Four rubber feet
E - Remote Control Unit
(Batteries not included)
A
B
C
Fig. 2
D
E
ASSEMBLY INSTRUCTIONS
Determine whether the Air Cleaner will be used on the floor, on a bench, or hanging from an overhead support.
If the Air Cleaner will be used as a mobile unit, proceed to “USING THE AIR CLEANER ON A BENCH
OR FLOOR SURFACE” section. For overhead or ceiling mounting, refer to section “MOUNTING THE AIR
CLEANER TO A CEILING OR OVERHEAD SUPPORT.”
IMPORTANT: When determining where to mount the air cleaner, always select a location where the air flow
is unrestricted. Do not locate the unit in a corner or near any heating or cooling vents.
CARTON CONTENTS