Filter
Top Products
My single-handle faucet with a DIAMOND Valve has an orange handle
limit stop. How do I set it?
Some single-handle faucets with DIAMOND Seal Technology that were
produced after October 1, 2008, feature a two-function handle limit stop.
The handle limit stop—which enables you to limit movement of the
handle, so it cannot move to the full-on hot position—offers the choice
of two settings:
1. Full range of handle motion (this option is pre-set at the factory).
2. A stop option that restricts handle motion to a 50/50 mix of hot
and cold water.*
To Change Your Handle Limit Stop Setting to a 50/50 Mix of
Hot and Cold Water:
• Remove handle.
• Move the orange switch to the half circle setting.
deltafaucet.com 8
*The handle limit stop should not be considered an anti-scald device.