Filter
Top Products
®
®
U
P
C
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
0
1
2
3
4
5
0 102030405060708090
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
Showerhead
Tubspout
Jets
COMPLETE VALVE COMPLIES WITH:
•
ASME A112.18.1
•
ASSE 1016
•
CSA B125
•
Showerhead GSA A-A-240
Indicates ADA compliance to
CABO/ANSI A117.1
•
ASSE Seal Authorized
•
CSA Certified
•
IAPMO Listed
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
ROUGH STANDARD SPECIFICATIONS:
• Requires 1 1/2" (38 mm) wall cavity.
• Back-to-back installation capability.
•
Solid brass fabricated body.
•
Jetted Shower with Monitor
®
Scald-Guard
®
valve.
Maintains a balanced pressure of hot and cold
water even when a valve is turned on or off
elsewhere in the system.
•
Maximum dial rotation adjustable between
90° and 180°.
• Field adjustable to limit handle rotation into
hot water zone.
• Adjusts for up to 1” wall thickness.
TRIM STANDARD SPECIFICATIONS:
• Must have rough valve to have complete
installation.
• Lever volume control handle; temperature
adjustment dial.
• Red and Blue graphics indicate hot/cold
temperature adjustment.
• Universal trim for 1800 series Jetted Shower and Jetted
Shower XO rough valves.
BATH MIXING
VALVES
■ 1800 Series Jetted Shower™ System
■ Trim Only
■ Tub/Shower
■ Rough Must be Ordered to Complete
Installation
■ Single Handle
■ Jetted Shower with Monitor
®
Scald-Guard
®
Valve
■ Pressure Balance
■ Volume Controlled with Lever Handle
■ Temperature Controlled with Dial
■ Universal Trim Kit
T1848 T1855
5"
(127 mm)
3 1/2"
(89 mm)
8 1/2"
(216 mm)
7 1/2"
(190.5 mm)
6"
(152.4 mm)
minimum
As
Desired
As
Desired
16"
(406.4 mm)
maximum
2"
(50.8 mm)
5"
(127 mm)
4"
(101.6 mm)
9"
(228.6 mm)
6 3/4"
(171.5 mm)
minimum
As
Desired
As
Desired
16"
(406.4 mm)
maximum
2"
(50.8 mm)
Inlet
Inlet
If recessed, the escutcheon
screws may need
to be shortened.
Plus or minus 1/2" (12.7 mm)
- A -
Cover must be removed prior
to installation of trim.
Cover must be removed prior
to installation of trim.
If recessed, the escutcheon
screws may need
to be shortened.
Plus or minus 1/2" (12.7 mm)
- A -
T1855
T1848
7 3/4"
(197 mm)
2.D.22