Dell UPS Site Preparation Guide, EMEA (230V) Revision 2, December 2012
Dell UPS Site Preparation Guide, EMEA.
Applies Dell Rackmount UPS Models, 3750W, 4200W, 5600W & 10kW
Note: This document is for guidance only. Actual installation instructions and safety cautions are included within the UPS User’s
Guide. Quick link to User’s Guides: http://dellups.com/support_download.asp > User Manuals and Publications.
Site Preparation Checklist
Installation site meets minimum environmental requirements.
Ensured all required accessories have been ordered with the UPS.
Electrical Preparation
Required electrical supply is available.
Scheduled an electrician to install the Dell UPS.
Provided a copy of this preparation guide to the electrician.
Made electrician aware of Hardwiring the UPS electrician’s checklist in the User’s Guide.
Site Preparation:
Physical Requirements for the Dell UPS
Dimensions (mm, W x D x H)
Weight (installed, no battery)
* EBM is an optional ‘external battery module’.
Environmental Requirements for the Dell UPS
Temperature (Storage, 24hr)
Temperature (Long-term Storage)
0 - 15,340m (0 - 50,000ft)
Heat Output for the Dell UPS
Heat Loss, Watts / BTU (normal mode)
Heat Loss, Watts / BTU (battery mode)
