Dayton DDEMR23322R Indoor Furnishings User Manual


  Open as PDF
of 1
 
Model DDEMR233224 Illustrated
4"
7-1/2"
21"
33"
15-3/4"
22"
4" 4"
3" R3" R
Model DDEMR23322R4 Illustrated
4"
7-1/2"
21"
33"
15-3/4"
22"
4" 4"
3" R 3" R
GENERAL
Sink bowls are formed of #22 gauge, nickel bearing stainless
steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 7" (large bowl), 5-1/8" (disposer bowl).
Coved Corners: 3" vertical and 2-1/4" horizontal (large bowl),
1-3/4" horizontal (small bowl).
Finish: Exposed surfaces are polished to a satin finish with
highshine bowl radius.
Underside: Fully undercoated to prevent condensation and
deaden sound.
OTHER
Drain opening: 3-1/2".
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as shown.
These sinks do
NOT comply with ASME A112.19.3-2000.
Model DDEMR233224
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2007 Elkay
(Rev. 1/07) 2-33D
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Dayton
®
Double Bowl Sink
Models DDEMR23322 and DDEMR23322R
SPECIFICATIONS
Cutout in
No. of
Countertop
1
1
/2" Dia.
Inside Inside (1
1
/2" Radius
Faucet Minimum
Model
Overall Left Bowl Right Bowl Corners)
Holes Cabinet
Number L W L W D L W D L W 4" Centers Size
DDEMR23322 33 22 7
1
/2 15
3
/4 5
1
/8 21 15
3
/4 732
3
/8 21
3
/8 3 or 4 36
DDEMR23322R 33 22 21 15
3
/4 77
1
/2 15
3
/4 5
1
/8 32
3
/8 21
3
/8 3 or 4 36
SINK DIMENSIONS (INCHES)*
*Length is left to right.Width is front to back.
4" 4"
4" 4"
4" 4" 4"
4" 4" 4"
3
3
4
4
HOLE DRILLING CONFIGURATIONS