Filter
Top Products
CrownBoiler.com
BIMINI BUDDY
HYDRAULIC
SEPARATOR
Designed to be installed
with any wall-mounted
Bimini boiler.
Introducing the New Bimini Buddy
The Bimini Buddy, designed to be installed with any wall-mounted
Bimini Boiler, includes all near boiler piping needed for good
hydraulic separation and air elimination in a compact, factory
assembled package. In addition, some models include provisions
for domestic hot water production.
The BB100I and BB100C models utilize the circulator that comes
with the Bimini boiler so a separate DHW circulator isn’t required.
They also include a three way zone valve for domestic hot water
priority that is wired directly to the Bimini without the use of any
additional controls.
All Bimini Buddies have an attractive jacket and convenient
connections for the boiler system, air vent and expansion tank.
The Bimini Buddy has reversible piping so that it can be piped
either right or left of the boiler (factory piping is for installation
on right side of boiler.)
Three Bimini Buddy Models
BB100H - For heat only applications.
BB100I - For connection of a Bimini boiler
to a heating system and an indirect water
heater like the Mega-Stor.
BB100C - Combi unit with a plate heat
exchanger and ow switch for domestic
hot water production in tight places.
Inside
View