Filter
Top Products
5925 Heisley Road • Mentor, OH 44060-1833
Carving
Station
FL-2206
Rev. 7 (4/08)
Page 1 of 2
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
OPERATING and MAINTENANCE INSTRUCTIONS
Model: CSH-122-10 Series, 120 and 240 Volt
ELECTRICAL SPECIFICATIONS:
Model No. Volts Watts Amps Hertz Phase NEMA Service
CSH-122-10 120 1100 9.2 60 1 5-15 15 AMP
CSH-122-10 240 1150 4.8 60 1 6-15 15 AMP
HOW TO OPERATE UNIT:
Plug cord into proper wall outlet.1.
Push thermostat switch 2. “ON” and turn thermostat
to no. 10.
Preheat for 30 minutes; then add cutting board 3.
and/or pans to the heated base.
Push lamp switch(es) to 4. “ON” for additional
heat.
NOTE: Proper food holding temperature is 140°F
(60°C) or higher.
For uncovered pans or product:
Leave thermostat on no. 10 setting.
For covered pans or product:
Turn the thermostat to no. 6 setting.
5. Push switches and turn thermostat “OFF” when
done.
CLEANING INSTRUCTIONS:
Remove power cord from wall outlet.1.
DO NOT immerse unit in water.2.
DO NOT get water on controls.3.
Wipe cooled exterior with soap and water.4.
DO NOT use abrasives or harsh 5.
chemicals.
REPLACEMENT PARTS:
Lamp, Red (250 Watts) ................................ 0820-001
Lamp, White (250 Watts) ............................. 0820-033
Lamp, Red (275 Watts/240 Volts) ................ 0820-014
Cutting Board ............................................... 1004-018
Legs - Adjustable ......................................... 1206-027
Socket ........................................................... 0822-037
THERMOSTAT KNOB
HOOD "ON/OFF"
THERMOSTAT BEZEL
HEATERS "ON/OFF"
0595-002
0848-063
3
2
1
8
4
5
6
7
OFF
10
9