Filter
Top Products
Structural Options
11
Pole Mount
PRCPS=Strut Rod and Clevis Set for
Square Poles
(Painted to match fixture)
12
PRCSS=Stainless Steel Strut Rod and
Clevis Set for Square Poles
(Clevis’ painted to match fixture)
12
PRCPR=Strut Rod and Clevis Set for
Round Poles
(Painted to match fixture)
13
PRCSR=Stainless Steel Strut Rod and
Clevis Set for Round Poles
(Clevis’ painted to match fixture)
13
Wall Mount
WRCP=Strut Rod and Clevis
(Painted to match fixture)
12
WRCS=Stainless Steel Strut Rod and
Clevis Set (Clevis’ painted to
match fixture)
12
Options
11
F=Single Fuse (120, 277 or 347V)
Specify Voltage
FF=Double Fused
(208, 240 or 480V)
Specify Voltage
Q=Quartz Restrike
14
EM=Quartz Restrike with Time
Delay (Also Strikes at Cold
Start)
14
EM/SC=Quartz Emergency
Separate Circuit
14
42CF/EM=Emergency Battery
Backup
15
PC=Button Type Photocontrol
(Specify Voltage)
HS=House Side Shield
16
VS=Polycarbonate Vandal
Shield
L=Lamp Included
Accessories
17
OA/RA1016=Photocontrol—Multi-Tap
OA/RA1027=Photocontrol—480V
OA/RA1201=Photocontrol—347V
MA1071-XX=5" Arm For Square Pole
MA1074-XX=5" Arm For Round Pole
MA1073-XX=Direct Mount for Square Pole
MA1076-XX=Direct Mount For Round Pole
MA1077-XX=Wall Bracket with 5" Arm
18
MA1200-XX=Direct Wall Mount Kit
18
MA1101-XX=Single Arm Tenon Adapter for 2 3/8" O.D. Tenon
MA1102-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1103-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1104-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1105-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1106-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1107-XX=2 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1108-XX=Single Arm Tenon Adapter for 3 1/2" O.D. Tenon
MA1109-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1110-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1111-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1112-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1113-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1114-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
INVUE
TM
1100
COOPER LIGHTING
DIMENSIONS
STRUCTURAL MOUNT
AREA ROADWAY
• One-piece, die-cast
aluminum housing
• One-piece aluminum
die-cast door frame. Door
frame opens via release
of one flush mount
toolless latch
• One-piece extruded
rectangular 5" arm
• Optional Strut Rod and
Clevis set for pole mount
or wall mount
• Impact resistant 1/8" thick
tempered clear flat glass
• Ballast and related
electrical componentry
are mounted to a
reinforced one piece
galvanized steel tray with
integral handle
• Choice of five (5) high
efficiency segmented
optical systems
constructed of premium
95% reflective anodized
aluminum sheet
• Medium-base porcelain
socket for HID lamp
sources
• Approximate net weight:
35 lbs. (16 kgs.)
DESCRIPTION
The classic lines and
sophisticated construction of the
Vision Site luminaire makes it an
ideal complement to site design.
The combination of smooth
contours and sharp rear reveals
allow the fixture to change
character from different viewing
angles while providing excellent
low-glare photometrics. U.L.
listed and CSA certified for wet
locations.
VXS
VISION SITE
SMALL
42-175W
Metal Halide
High Pressure Sodium
Compact Fluorescent
ARCHITECTURAL
AREA LUMINAIRE
ORDERING INFORMATION
SAMPLE NUMBER: VXS-175-MH-MT-3S-BK-PRCPS-L
NOTE: 1 Arm not included. See accessories. 2 All HID lamps are medium-base. 3 Available in Type 3S, 4S, and 5S distributions only. 4Nominal M.O.L lamp length of 57W
CFL not to exceed 7". 5 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V. Specify with
UNV voltage designation. 6 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
7 Dual-tap is 120/277V wired 277V. 8 Multi-tap is 120/208/240/277V wired 277V. 9 Triple-tap is 120/277/347V wired 347V. 10Custom and RAL color matching
available upon request. Consult your INVUE Lighting Systems Representative for further information. 11 Add as suffix in the order shown. 12 Structural options do
not include arm assembly (See Accessories). Compatible with 5" MA1071 arm only. 13 Structural options do not include arm assembly (see accessories).
Compatible with 5" MA1074 arm only. 14 Quartz options not available with SL optic. 15 Battery backup operates 90 minutes at minimum 32°F (0°C), 42W maximum.
Type 3S, 4S, 5S optics only. 16 House side shield not available on 5S and SL optics. 17 Order separately, replace XX with color suffix. 18 For use in down lighting
applications only. 19 Specifications and dimensions subject to change without notice.
EPA-Effective Projected Area: Single 1.27 / Single Structural 1.28
23" [584mm]
5" [127mm]
6"
[152mm]
13 1/2" [343mm]
Product
Family
1
VXS=Vision Site
Small
Lamp
Wattage
HID
2
70=70W
100=100W
150=150W
175=175W
Compact
Fluorescent
3
42=42W
57=57W
4
Lamp Type
MH=Metal
Halide
HPS=High
Pressure
Sodium
CF=Compact
Fluorescent
5
Voltage
6
120=120V
208=208V
240=240V
277=277V
347=347V
480=480V
DT=Dual-Tap
Wired 277V
7
MT=Multi-Tap
Wired 277V
8
TT=Triple-Tap
Wired 347V
9
UNV=120-277V Universal
Electronic Ballast
Optical System
2S=Type II
3S=Type III
4S=Type IV
5S=Type V
SL=Spill Light
Eliminator
Colors
10
(add as suffix/
must specify)
BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite
Metallic
Options &
Accessories
(See Below)
IP66 Rated
3G Vibration Tested
VXS
Metal Halide 70, 100, 175W
High Pressure Sodium 70, 100, 150W
Compact Fluorescent 42, 57W
WATTAGE TABLE
12 13/16"
[325mm]
26" [703mm]