Filter
Top Products
DESCRIPTION
Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
Separate Wiring
Compartment
18” flexible conduit
4.65”
9.29”
10.12”
10.79”
12.09”
7.95”
9.27”
6.15”
4.65”
1.60”
9.25”
8.22”
7.45”
Required
above
ceiling
Integral Electronic
Metal Halide Ballasts
45º x 45º
Adjust
Double
Gimbal
A ... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder coated
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
the inner hardware of the fixture from sight
below the ceiling. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.
E ... Lamps
Two (2) PAR20 Metal Halide lamps
mounted in adjustable double gimbal.
Lamp holders are removable and may be
regressed 1” for additional cut-off. Lamps
can accept up to three optical accesso-
ries (i.e. lens + hex louver + snoot). 45º x
45º locking lamp adjustment. Beveled-
edge lamp ring is secured with thread-
less, bayonet action. Optional retractable
arm is available for lamp pulldown and
extreme aiming. Includes Med. Base
sockets.
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.90” x 10.38”
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Two (2) Light
PAR20 Metal Halide
Remodel Housing
w/ 0.75” Trim Flange
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes TWO (2) PAR20 Metal Halide
lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 022408
Configuration
C2
=
COMBOLIGHT
Recessed Two (2) Light
Housing
R
=
Remodel
C2 R E T
Lamp Type / Wattage Label
020M20
=
20 Watt PAR20 Metal Halide
039M20
=
39 Watt PAR20 Metal Halide
Power Supply
E
=
Electronic Metal Halide
Ballast
Power Supply
Voltage
1
=
120V
2
=
277V
Lamp Mechanism
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Finish
W
=
White
B
=
Black
S
=
Industrial Silver
Trim Flange
T
=
0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
Finish
W
=
White
B
=
Black
S
=
Industrial Silver
For use with 20W or 39W PAR20 Metal Halide lamps.