Filter
Top Products
FAIL-SAFE
®
ARCHITECTURAL VANDAL RESISTANT
COOPER LIGHTING
A
A
C CD
A
ORDERING INFORMATION
SAMPLE NUMBER: DDTC- PP-16A-120V
Lamp Type
TT=Twin Tube
QD=Quad Tube
CT=Compact
Triple
DD=2D
IN=Incandescent
Product Family
11" Round Series
TC=Clear
Prismatic
Polycarbonate
Lens
TW=White
Polycarbonate
Lens
Wattage
7=7W
16=16W
21=21W
26=26W
27=27W
32=32W
75=75W
Ballast
N=Normal Power
Factor
H=High Power
Factor
A=Electronic
Paint Configuration
PP=Perimeter Paint
(Standard)
HE=Horizontal Eyelid
Voltage
120=120V
277=277V
Accessories
(Order Separately)
PB-120V=Photocell Kit
PB-277V=Photocell Kit
VRSD=V-R Screwdriver
for all Lens Screws
VRSB=V-R Screwdriver
Bit for all Lens
Screws
ABC
11" dia. 4" 3 1/2"
(279mm) (102mm) (89mm)
A
B
B
C
A
A
Options
F1=Single Fused
F2=Double Fused
4
LL=Lamp Included
RP=Rust Proof
Construction
EBP=Emergency
Battery Pack
SCT=Deep Surface
Conduit Box
Color
Blank=Black (Standard)
WHT=White
DBZ= Bronze
AP=Gray
DIMENSIONS
DESCRIPTION
The Fail-Safe VR 2000
11" Round Series combines
strength-gaining architecture with
energy-saving technology.
Architecturally angled facets blend
with its circular form to actually
increase the ability of the lens to
deflect blows and absorb impact.
Extra thick injection molded
polycarbonate lens incorporates an
optical design that obscures the
lamp image and spreads light
evenly. Perimeter paint is available
in 4 standard colors. Choose
VariColor™ to customize your
product with your corporation or
school colors. An emergency
battery pack is also available on
fluorescent fixtures. U.L. listed and
C.S.A. certified for wet locations.
VR Products carry a Lifetime
Warranty. For full information, see
warranty statement at the
beginning of this section.
• AccUView coating for the
one piece injection molded
polycarbonate lens.
AccUView is a UV inhibitor
coating inside and out to
lengthen lens life.
Minimum .130" thick with
internal blondels
• Four stainless steel TORX®
screws with center reject
pin. Screw heads are
recessed
• 16 ga. CRS reflector with
white polyester powder
coat finish
• Housing is die cast
aluminum. Requires four
1/4" diam. fasteners
• Fluorescent socket is
polycarbonate.
Incandescent is Porcelain
medium base socket with
nickel-plated brass screw
shell
• Gasketing is one piece die
cut closed cell and seals
lens and housing
• Copper wound NPF, HPF or
electronic ballast are
available with certain
wattages. Consult ordering
information
TC
TW
11" ROUND
ADA COMPLIANT
7W-32W
Fluorescent
75W
Incandescent
POLYCARBONATE
11" ROUND LUMINAIRE
CLEAR PRISMATIC OR WHITE
VariColor
™
SPEC ANY COLOR
Flat
Deep
PP=Perimeter Paint
HE=Horizontal Eyelid
ORDERING MATRIX
Notes: For additional options, consult your Cooper Lighting Representative. Specifications and dimensions subject to change without
notice. Products also available in non-US voltages and 50Hz for international markets.
1. Supplied from factory with deep casting. 2. Only available as HPF. 3. RP option not required when casting in supplied. 4. F2 option for
use with 208/240/480 only. * - Does not apply when using electronic ballast.
1420