Filter
Top Products
DESCRIPTION
Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
Separate Wiring Compartment
18” flexible conduit
4.65”
18.58”
19.41”
29.08”
21.38”
7.95”
9.27”
10.96”
4.65”
1.60”
9.25”
16.44”
7.45”
Required
above
ceiling
Integral Electronic Metal
Halide Ballasts
45º x 45º
Adjust
Double
Gimbal
A ... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.
E ... Lamps
Four (4) T4 GU6.5 Metal Halide lamps
with reflectors mounted in adjustable
double gimbal. Lamp holders are remov-
able and may be regressed 1” for ad-
ditional cut-off. Lamps can accept up to
three optical accessories (i.e. lens + hex
louver + snoot). 45º x 45º locking lamp
adjustment. Beveled-edge lamp ring is
secured with threadless, bayonet action.
Optional retractable arm is available
for lamp pulldown and extreme aiming.
Includes GU6.5 TAL sockets.
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.90” x 19.67”
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Four (4) Light
T4 GU6.5 Metal Halide
Remodel Housing
Trimless
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FOUR (4) T4 GU6.5 Metal Halide
(GE® Constant Color Super Mini) lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 022408
Configuration
C4
=
COMBOLIGHT
Recessed Four (4) Light
Square
Housing
R
=
Remodel
C4 R E N N
Lamp Type / Wattage Label / Reflector Type
020MCN
=
20 Watt T4 GU6.5 SuperMini Narrow
020MCM
=
20 Watt T4 GU6.5 SuperMini Medium
020MCW
=
20 Watt T4 GU6.5 SuperMini Wide
Power Supply
E
=
Electronic Metal Halide
Ballast
Power Supply
Voltage
1
=
120V
2
=
277V
Lamp Mechanism
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Finish
N
=
Trimless
Trim Insert
N
=
Trimless
Housing Interior/Electrical Door
/Sleeve Finish
W
=
White
B
=
Black
S
=
Industrial Silver
T4 GU6.5 Lamp with Reflectors
This fixture utilizes the GE® SuperMini Constant Color
Lamp and includes high-performance clear aluminum
reflectors in narrow, medium, or wide distributions. Non-
standard color reflectors are available upon request.