Filter
Top Products
COOPER LIGHTING - LUMARK
®
CANOPY
551
COOPER LIGHTING
DIMENSIONS MOUNTING DIMENSIONS
• One-piece injection-
molded UV stabilized
polycarbonate lens is a
minimum of 0.130" thick.
All light-control prisms
and blondels are on the
inside surface of the lens,
reducing dirt build-up and
making cleaning easier
• Lens is held with four
stainless steel screws.
Fasteners are captive in
the lens and sealed by
means of a neoprene
O-ring
• Die-cast aluminum with
reinforcing ribs on
exposed sidewalls.
Thickened areas occur at
lens junction and at
mounting/fastening holes.
Four 1/2" NPT conduit
entries in sides and one
in back of housing.
Black polyester powder
coat is standard
• One-piece die-cut
closed-cell silicone
mounting gasket
• Copper-wound NPF
ballast standard. Ballast
is available in high power
factor with some lamps.
Consult ordering
information
• Porcelain medium-base
socket with nickel-plated
brass screwshell
• Approximate net weight:
20 lbs. (9 kgs.)
DESCRIPTION
The Lumark Parker combines
strength-gaining architecture
with energy-saving technology.
U.L. listed for wet locations
and CSA certified. Mount on
non-combustible surface.
The durable, versatile Parker is
perfect for use in parking bays,
entrances and stairwells, as
well as rapid transit stations
and loading docks.
PR
PARKER
70-175W
High Pressure Sodium
Metal Halide
CLEAR PRISMATIC
POLYCARBONATE
PARKING GARAGE
LUMINAIRE
7 "
[178mm]
3 3/16"
[81mm]
NOTES: 1 Uses S-55 (55 Volt) lamp only. 2 Not Available in 70 & 100W Metal Halide. 3 Products also available in non-US voltages and 50Hz for international markets.
Consult factory for availability and ordering information. 4 Multi-Tap ballast is 120/208/240/277V wired 277V. 5 Triple-Tap ballast is 120/277/347V wired 347V.
Add desired voltage to end of catalog number.6 Add as suffix in the order shown. 7 Lamp is shipped separate from luminaire. Lamp is Cooper designated
product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 8 Order separately. 9 Specifications and dimensions subject
to change without notice.
Options
6
Q=Quartz Restrike DC Bayonet Base
(Quartz lamp will not come on at initial cold start)
QM=Quick Mount
LL=Lamp Included
7
TR=Tamper Resistant Screws
F1=Single Fuse (120, 277 or 347V)
F2=Double Fuse (208, 240 or 480V)
Accessories
8
TK=Trunnion Kit
VRSD=Tamper-Resistant Screwdriver
VRSB=Tamper-Resistant Bit
ORDERING INFORMATION
SAMPLE NUMBER: HPPR-70N-240V-XX
Lamp Type
HP=High
Pressure
Sodium
MH=Metal
Halide
Series
PR=Parker
Lamp
Wattage
70=70W
100=100W
150=150W
1
175=175W
Ballast
H=Normal
Power
Factor
N=Normal
Power
Factor
W=HPF CWA
2
Voltage
3
120V
208V
240V
277V
347V
480V
MT=Multi-Tap wired 277V
4
TT=Triple-Tap wired 347V
5
Options &
Accessories
(See Below)
11 5/8" sq.
[295mm]
(4) 9/32" Dia. [7mm]
Mounting Holes
8 7/16" sq.
[214mm]