Cooper Lighting FUS Indoor Furnishings User Manual


  Open as PDF
of 1
 
COOPER LIGHTING
FAIL-SAFE
®
CONFINEMENT
B
C
B
A
ABC
FUS12 5" 13 9/16" 12 1/4"
1' x 1' (127mm) (344mm) (311mm)
FUS12 5" 13 9/16" 26 5/16"
1' x 2' (127mm) (344mm) (668mm)
FUS12 5" 13 9/16" 50 1/8"
1' x 4' (127mm) (344mm) (1273mm)
FUS16 5" 19 1/16" 26 5/16"
1-1/2' x 2' (127mm) (484mm) (668mm)
FUS16 5" 19 1/16" 50 1/8"
1-1/2' x 4' (127mm) (484mm) (1273mm)
MOUNTING
B
A
B
B
A
A
C
B
ORDERING INFORMATION
SAMPLE NUMBER: FUS-S12-313-277-82/96-EBT2
NOTES: For additional options, consult your Cooper Lighting Representative. Specifications and Dimensions subject to change without notice.
Electronic ballast may cause interference with other electronic devices. If interference occurs, move the device away from the product or plug/connect into a different
circuit/outlet.
1
For specific electronic ballast, specify brand and catalog number.
2
Electronic ballast not available for F20T12 lamps.
3
Products also available in non-US
voltages and 50Hz for international markets. Consult your Cooper Lighting Representative for availability and ordering information.
4
16” Width Only.
5
For use with
Compact Fluorescent, Biaxial, and 20W T12 lamps.
6
For additional information about the TCS option see pages 1106 and 1107.
Ballast
Blank=Magnetic Ballast (Standard)
5
LEOC8=T8 Energy Saving Ballast
LE3=40W T12 Energy Saving Ballast
Electronic Ballast
1
EBT1=(1) Ballast for use with Compact
Fluorescent Lamp
EBT2=(2) Ballasts for use with Compact
Fluorescent Lamp
EB81=(1) Ballast for use with T8 Lamp
EB82=(2) Ballasts for use with T8 Lamp
EB21=(1) Ballast for use with T12 Lamp
2
EB22=(2) Ballasts for use with T12 Lamp
2
EBX1=(1) Ballast for use with Biaxial Lamp
EBX2=(2) Ballasts for use with Biaxial Lamp
Lamp Type
1' Nom. Length
Compact Fluorescent
113=(1) 13W Lamp
126=(1) 26W Lamp
213=(2) 13W Lamps
226=(2) 26W Lamps
313=(3) 13W Lamps
2' Nom. Length
T5 Fluorescents
114=(1) 14W Lamp
214=(2) 14W Lamps
314=(3) 14W Lamps
2
414
=(4) 14W Lamps
124=(1) 24W HO Lamp
224=(2) 24W HO Lamps
324=(3)24W HO
Lamps
2
424
=(4) 24W HO Lamps
T8 Fluorescents
117=(1) 17W Lamp
217=(2) 17W Lamps
317=(3) 17W Lamps
417=(4) 17W Lamps
4
T12 Fluorescents
120=(1) 20W Lamp
2
220=(2) 20W Lamps
2
320=(3) 20W Lamps
2
420=(4) 20W Lamps
4, 2
Biaxial Fluorescents
140BX=(1) 40WLamp
240BX=(2) 40W Lamps
340BX=(3) 40W Lamps
4
T8 U-Lamp
2U6T8=(2) 32W Lamps
4
2U15/8=(2) 31W
Lamps
4
3U15/8=(3) 31W
Lamps
4
4' Nom. Length
T5 Fluorescents
128=(1) 28W Lamp
228=(2) 28W Lamps
328=(3) 28W Lamps
2
428=(4) 28W Lamps
154=(1) 54W HO Lamp
254=(2) 54W HO Lamps
354=(3) 54W HO Lamps
2
454=(4) 54W HO Lamps
T8 Fluorescents
132=(1) 32W Lamp
232=(2) 32W Lamps
332=(3) 32W Lamps
432=(4) 32W Lamps
4
T12 Fluorescents
140=(1) 40W Lamp
240=(2) 40W Lamps
340=(3) 40W Lamps
440=(4) 40W Lamps
4
Lens Type
Inner Layer
(optional)
90=.005 UV
Absorbing
Overlay
Fixture Side
80=.125 Prismatic
Acrylic
81=.156 Prismatic
Polycarbonate
82=.187 Prismatic
Polycarbonate
93=.156 Prismatic
Tempered
Glass
Environmental
Side
84=.125 Clear
Polycarbonate
85=.187 Clear
Polycarbonate
86=.250 Clear
Polycarbonate
87=.375 Clear
Polycarbonate
88=.500 Clear
Polycarbonate
94=.187 Clear
Tempered
Glass
96=.250 Clear
Tempered
Glass
97=.375 Clear
Tempered
Glass
98=.500 Clear
Tempered
Glass
/
Options
CPH=Continuous Concealed Piano
Hinge
EBP=Emergency Battery Pack
FNL=Fluorescent Night Light
(Lamp by others.)
GLR=Fuse and Holder
RIF=Radio Interference Filter
SPK=Speaker Housing
Compartment (extends
housing)
WL=Wet Label
Auto Control Modules
ACM/FNL=for FNL
On/Off Switches
TCS=Touch Control System
6
Stainless Steel Housing
SSN=Natural Brushed Finish
SSP=Polyester Powder Coat Finish
Fasteners
SF3=Allen-Head (center pin reject)
Accessories (Order Separately)
9306=Allen-Head Wrench
VRSD=TORX
®
-head Vandal
Resistant Screwdriver
Product Family
FUS=Ultimax Surface
Luminaire
Steel Gauge
S=12 ga. (Ultimax)
X=14 ga. (Maximum)
D=16 ga. (Medium)
N=18 ga. (Minimum)
Fixture Width
12=12" wide
16=16" wide
• Lens choice of prismatic
acrylic, prismatic poly-
carbonate or prismatic
tempered glass on fixture
side, clear polycarbonate
or clear tempered glass on
environmental side
• Stainless steel tamper-
resistant TORX
®
screws
with center pin reject are
standard. Allen-head
screws with center pin
reject are optional
• Clamshell housing design
combines die-formed 12
ga., 14 ga. or 16 ga. CRS
body with continuous
welded and ground ends
to form a one-piece,
seamless, doorless
housing. Standard white
high reflectance polyester
powder coat finish
• Lamps by others
• Lens secured by thru-studs
and vertically adjustable
internal CRS hold-downs
• Internal security hinge
• Die-formed CRS backplate
(gauge to match housing)
• Standard Class P, CBM/ETL
ballast
• U.L. listed, C.S.A. certified,
standard damp label,
optional wet label
DIMENSIONS DESCRIPTION
The Fail-Safe FUS Series
combines maximum security
construction features with
energy saving technology. This
surface mounted luminaire
utilizes a one piece clamshell
housing, security lensing and
tamper resistant fasteners to
maximize impact resistance and
prevent contraband
concealment and unauthorized
fixture penetration. An
emergency battery pack is
available as an option. U.L.
listed and C.S.A. certified for
damp locations.
Voltage
3
120=120V
277=277V
UNV=120V
through
277V
FUS
13W-160W
Fluorescent
ULTIMAX SURFACE
LUMINAIRE
1461