Cooper Lighting 114R Indoor Furnishings User Manual


 
NEO-RAY
ARCHITECTURAL Recessed
559
COOPER LIGHTING
FENESTRA
SERIES
112R/114R
AMBIENT WALL WASH
RECESSED
Recessed mounting for T-
grid, sheetrock ceiling and
slot tee 9/16”. Can be
mounted end to end or side
by side.
20 ga. steel housing. 24 ga.
steel reflector.
Baked on low gloss white
powder coated polyester
finish.
1’ x 2’ or 1’ x 4’
configurations
Shielding panels consist of
perforated metal shielding
panels backed by a white
acrylic difusser. (1) or (2) T5
or T5HO.
(1) or (2) 40W or 50W
biaxial lamps (Philips
Recommended) (not by
NEO-RAY).
120, 277 or 347 Volt,
electronic ballast.
Consult factory for
dimming and emergency
options.
UL Listed, C-UL Listed
DESCRIPTIONDIMENSIONS
A graceful arched housing with
elegantly contoured perforated
lamp diffuser. This luminaire has
no visible lamps, fasteners,
hardware, or glaring reflectors,
just soft, diffused, wall lighting.
"The Fenestra" Series
112R/114R/BX a totally soft wide
distribution wall light. The
precisely crafted components
provide for a high-tech
appearance and a low tolerance
fit. These elements combined
make the NEO-RAY Fenestra
Series 112R/114R/BX an
appropriate luminaire for
application for lighting walls in
executive offices, private offices,
conference rooms, corridors,
open office spaces, VDT
workspaces, reception areas, and
dining spaces.
ORDERING INFORMATION
SAMPLE NUMBER: 112R-1BX40W-48-2EB-SI
TYPICAL MOUNTING INFORMATION SERIES 211R/214R
STANDARD LUMINAIRE SECTION
NOTES: For complete product data, refer to the NEO-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products available in
non-US voltages and frequencies for international markets. Consult your Cooper Lighting Representative for availability and ordering information.
Series
Number
112/114
No. of Lamps
1=1 Lamp
Lamp Type
BX40W
BX50W
Ceiling Type
ETG=Exposed T-
Grid
STG=Slot T-Grid
SR=Sheet Rock
Ballast
EB=Electronic Ballast
(Standard)
DB=Dimming Ballast
Switching
Options
SI=Single
Switching
Voltage
1=120V
2=277V
3=347V
Voltage
1=120V
2=277V
3=347V
Standard EM-Pack
EM=Emergency
Pack(Consult Factory)
Mounting
R=Recessed
A=Air Return
---
-