Filter
Top Products
1775
1
2
3
12” (30,5 cm)
Shelf
& Rod
12” (30,5 cm)
SuperSlide
®
16” (40,6 cm)
Shelf & Rod
16” (40,6 cm)
SuperSlide
®
with Hang Rod
Push pr
e-loaded anchor thr
ough suppor
t
bracket and into drilled hole. Use bottom of
hammer handle to push in pin. For
r
emoval, pry pin out with screwdriver.
Empuje el tar
ugo precargado por el soporte en
el agujer
o pr
eforado. Use la par
te inferior del
mango del mar
tillo para empujar la clavija
hacia adentr
o. Para r
emover
, palanquee la
clavija sacándola conun destornillador.
Level shelf. Drill 1/4” hole through wall using
suppor
t bracket as guide. DO NOT PUNCH
HOLES.
Nivele la repisa. Perfore un agujero de 6 mm a
través de la pared usando el soporte como
guía. USE TALADRO SOLAMENTE
.
Use one support bracket 2-3” from each end of shelf and one every 36” in between. Position support
bracket on shelf as shown. Note pr
oper position for various shelf types.
Coloque un sopor
te entre 5 cm y 7,6 cm desde cada extremo de la repisa y a cada 91,4 cm entre
medio. Ponga el sopor
te en la repisa tal como se muestra. Tome nota de la posición correcta para los
diversos tipos de r
episas.
75381 0177506
01-84617
If a ClosetMaid® product does not give user complete
satisfaction when installed in
accordance with manufacturer's instructions,
it will be exchanged free of charge. Only the unsatis
-
factory part in a multi-piece product
will be exchanged.
Consumer Toll-Free Help Line
1-800-874-0008
(U.S.A
and
Canada)
Manufacturer reser
ves the right to
change specifications without notice.
Made
inUSA
©ClosetMaid Corporation 2005
Ocala, FL 34478-4400