Cleveland
™
P
roject ________________________________
I
tem __________________________________
Quantity _______________________________
FCSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
DIRECT STEAM KETTLES
Cleveland Standard Features
■ Kettle legs of 1
5
⁄8˝ OD, type 304 Stainless Steel, with 3 level
adjustable feet, with three-bolt flanges for floor bolting
■ T
ype 304 Stainless Steel construction, with #4 finish
on kettle and supports
■ Tilting Mechanism with permanently lubricated, self-locking,
Worm Drive of space saving design
■ 50 psi Steam Jacket Rating on 80 - 100 gal. models,
35 psi Steam Jacket Rating on 125 - 150 gal. models
■ 50 psi chrome plated Safety Valve on 80 - 100 gal. models,
35 psi chrome plated Safety Valve on 125 - 150 gal. models
■ High Capacity Pouring Lip
■ Condensate Drain Valve with insulated handle
■ Steam Control Valve mounted on console
■ Typical approvals include NSF and ASME
Options & Accessories
❐ Type 316 Stainless Steel Kettle Liner for high acid food
products (316)
❐ Lift-off Covers (CL)
❐ Steam Control Kit includes: Steam Trap, Condensate Strainer,
Check Valve, nipples and fittings, factory assembled and mount-
ed on kettle (SCK2)
❐ Spring-assisted, hinged, rotatable, domed Stainless Steel Cover
(CHS-)
❐ Hot and Cold Water Faucet, comes with Swing Spout (DPK)
❐
2˝ or 3" diameter
T
angent Dr
a
w-Off
V
alv
e (TD2 or TD3*), *TD3 will
r
aise height of kettle by 5-5/8" (143mm)
❐ 3" diameter Butterfly Valve (BV3)
❐ 100 psi Pressure Option (PO) (for 125 gallons and larger)
❐ Cooking Baskets and Tri-Basket Supports (BS and TBS)
❐ Pan Carrier (PCK)
❐ Measur
ing Str
ips (MS)
❐ Gallon Markings (KM)
❐ K
ettle Accessor
y Kit (KAK) includes:
❐ Clean-up Brush (CB) ❐ 36˝ Kettle Paddle (KP)
❐ 36˝ Kettle Whip (KW) ❐ 36˝ Kettle Brush (KB)
❐ Draw-off Brush (DB) ❐ 24 oz. Ladle (KL)
❐ Swing Funnels f
or dr
ain (SF)
❐ Faucet Mounting Bracket (FBKT)
❐ Pressure Reducing
V
alv
e f
or regulating incoming
steam pressure of over 45 psi (PRV-K)
Shall be CLEVELAND, Direct Steam Kettle, Quad-leg mounted,
Model KDL - _____ - T, _____ gallons, Tilting (hand or power) 23
Steam Jacketed. Type 304 Stainless Steel kettle and support
legs.
50 psi Steam Jacket Rating on 80 - 100 gallon, 35 psi on125 gallon and
larger;
Steam Control Valve; heavy re-enforced Rolled Rim. To oper-
ate, connect directly to a steam source supplying 10 to 45 psi
steam.
❐ Hot and cold, or cold only, Kettle Filler with 60˝
Hose (DKF-K or SKF-K)
❐
Automatic Water Cooling (AWC-1), requires Console Mounting
Option
❐ Alternate Mounting Systems - Console Mounting
❐ Automatic Water Meter (GMF or LMF)
❐ Water Meter Stand (SWM)
❐ Food Strainer (FS)
❐ Flo
w Div
erter (FD)
❐ Drain Strainers (DS-)
❐ Pre-Rinse Spr
a
y Head and Hose (PRSK)
❐ Heat Deflector Shield (HS001)
❐ Correctional Packages
Short Form Specifications
Shown with optional Spring-Assisted Cover, 2" Tangent Draw-Off Valve
MODELS: KDL-80-T KDL-125-T
KDL-100-T KDL-150-T
QUAD-LEG, DIRECT STEAM
TILTING, 2⁄3 STEAM JACKETED
80 or 100 GALLONS (300 or 375 LITERS)
SECT. X PAGE 11
0707