Filter
Top Products
21020690 B 6500 Disk Array User’s Guide
Chapter 4 Maintenance, Troubleshooting & Hardware Replacement
Page 4 - 22 Drive Failure, Replacement, and Rebuilding
Drive Failure
Indications
When a drive failure occurs, the following events will follow:
• The display/operation panel will immediately change from
(or assigned array name) to
in which denotes the position of the disabled drive (in this example,
drive 3—the third drive from the right).
• The audio alarm will be activated (if enabled).
To Turn Off
Alarm, Press
SELECT Key
To turn off the audio alarm temporarily, press the SELECT key or one of the
arrow keys. Doing so will move the display to a new menu item and erase any
hexadecimal error codes that may have been showing on the display. (Note that
these error codes are nonvolatile and can be accessed at any time for service
purposes.)