Chromalox B-113 Water Heater User Manual


 
Immersion
B-113
OVER-THE-SIDE
Clean Water (pH6 to pH8) Copper
Demineralized or De-ionized Water Stainless Steel (passivated)
INCOLOY
®
Fluoropolymer
Medium Weight Oil, Alkaline Cleaning (low concentration) Steel
Mild Soaking Cleaners
Mild to Medium Corrosive Solutions, Many Oxidizing Stainless Steel
Acids, Organic Chemicals, Mild Aqueous Solutions INCOLOY
®
Chromic Acid (10%), Nitric Acid (to 65%) Titanium
Salt Brine, Many Plating Solutions (i.e. Nickel, Silver,
Zinc, Gold)
Soft Metal Melting Cast Iron
Molten Metal, High Corrosive Ceramic
Most Acids, Plating Solutions, Pickling Solutions Fluoropolymer
Quartz
2
L-Shaped Installation Side Mount Installation Deep Tank Installation
1. Consult Corrosion Guide in the Technical section for specifi c material recommendations.
2. Not for use in hydrofl uoric acid and alkaline solutions.
Material Being Heated Typical Sheath Material
Over-the-Side Immersion Heaters
Application & Selection
Guidelines
Applications
The large variation in heating element material
and shapes of over-the-side immersion heat-
ers offers a wide selection in the application
of these units. Water, oils, solvents, plating
baths, salts and acids are some of the many
liquids and viscous materials commonly
heated with immersion heaters. Over-the-side
types permit portability, easy removal for
cleaning of tanks and heaters and ample work-
ing area within the tank when installed.
Important — When selecting a tank heater
design, the user should make sure the sheath
material is suitable for the solution being
heated at the maximum temperature expected,
with proper safety factor.
Sheath Material — Selection Guidelines
1
L-Shaped Metal Sheath TLC & KTLC B-115
TLO & KTLO B-116
TLS & KTLS B-117
TLI & KTLI B-118
Side Mount Metal Tube GS & GT B-119
GS3 & GT3 B-120
L-Shaped Metal Tube GSL & GTL B-121
GSL3 & GTL3 B-122
GSV3 & GTV3 B-123
Side Mount Quartz Tube QM & QM3 B-124
Side Mount Metal Sheath PTH & PTHT B-125
PTHF B-126
CT B-127
Side Mount TPR & TPF B-128
Fluoropolymer Coated GTF & GTFL B-129
GXF & GXFL B-130
GTF6 & GTF9 B-132
L-Shaped GTFL3 B-133
Fluoropolymer Coated
Heater Model Page
Over-the-Side Immersion Heaters — Selection Guidelines
Drum Heater KBLC & KBLS B-134
Salt Bath Heater TBL & TBL-A B-135
Deep Tank Heater BLCK-MH & BLCS B-136
Portable Tank Heater CH-OTS B-137
Soft Metal Melting Heater CIT B-138
Ceramic Sheath CS B-139
Side Mount Heat Exchanger GRT & GRS B-141
US & UT B-143
GHTF B-144
Terminal Enclosure Dimensions B-145
Optional Accessories B-147
Heater Model Page