Filter
Top Products
in the roof of the appliance. The
location and positioning of the throat
plate is shown in Fig. 2.
Before initial lighting check that the
front fence is fitted correctly and that
the doors tighten properly.
COMMISSIONING
On completion of the installation and
after allowing a suitable period of
time for the fire cement and mortar to
dry out, make a layer of ash or sand
on the base of the stove before
lighting it and checking to ensure
that smoke and fumes are taken from
the appliance up the chimney and
emitted safely. Also check all joints
and seals. On completion of the
installation and commissioning
please leave the operating instruc-
tions with the customer and advise
them on the use of the appliance.
Page 9
Country 8B WB 10/00