BI-PART SLIDING DOOR
MODIFICATION
665555550011--XXXX
NOTE: XX is door height
APPLICATION
This modification is available for Model SD and GSD standard door operators with 24V control circuits (M) and logic control board (L).
FUNCTIONS
Required on slide door operators where one operator is used to open two bi-parting doors, one sliding left and the other sliding right to
open. Includes a modified second slider and a second door bracket mechanism. The operator is not effected. However, operator
horsepower must be selected using the area (in square feet) of entire door opening.
INSTALLATION INSTRUCTIONS
Refer to the slide door instructions provided with the operator for operator mounting, electrical connections and operating instructions.
© 2005, The Chamberlain Group, Inc.
01-13407B All Rights Reserved Printed in Mexico
KIT PART # DESCRIPTION
K75-10471 Trolley Slider Kit For Bi-Parting Doors
Screw, #10-32 x 1-1/4" Socket Hex (2 Places)
#10 Flatwasher (4 Places)
#10 Lock Washer
(2 Places)
#10 Hex Nut (2 Places)
Slider Carriage Assembly
Take-Up Bolt
Master Link