Filter
Top Products
Cast Louvre Kit
Installation Instructions
Model: EWF36CLK
Please read these instructions before beginning the
installation.
General Information
Install the louvre kit after all other fireplace installation
work has been completed, thoroughly checked and
tested for proper operation and installation require-
ments.
Check Contents of Shipping Carton
Compare contents shown in Figure 1 with actual parts
received. If any parts are missing or damaged, contact
your local dealer before starting installation.
Louvre Kit Parts:
Basic universal (4) 20006024
Hinge Cover (2) 20005994
1/4 - 20 x 1/2” phillips round head screw (4)
Instruction sheet
Tools required: phillips screwdriver, needlenose pliers
Install Basic Universal
1. Insert each basic universal into openings in fire-
place. Be sure the damper tabs have engaged plate
sheet steel flanges in openings. NOTE: The damper
tabs always point down. (Fig. 2)
2. Before inserting upper right panel, push the damper
handle in flush with face. Once the panel is in place,
use needlenose pliers to pull damper handle out
through lattice in panel.
3. Adjust the panels for a symmetric appearance.
Install Hinge Covers
1. Align hinge cover on outside of hinge with holes
located in the hinge. (Fig. 3)
2. Attach hinge cover using screws provided.
KT400
Lattice
view from behind
5/03
Damper Tab
(Always point down)
Rear View
Basic Universal
KT400
Fig. 2 Place basic universal, making sure the damper tabs
engage plate steel metal flanges of fireplace.
Side View
Metal Flanges
Upper Panel Orientation
Lower Panel Orientation
KT401
Hinge install
6/3/03 djt
Hinge
Screws
Hinge Cover
Hinge cover
will cover this
area.
KT401
Fig. 3 Install hinge cover.
CAR153
EWF36CLK
Cast Lattice
Kit
6/3/03 djt
Basic Universal
(4)
1/4 - 20 x 1/2”
Phillips Round
Head Screws
(4)
Hinge Cover (2)
CAR153
Fig. 1 Carton contents.
Thicker side
toward the
top for top
installation
Thicker
side toward
the bottom
for bottom
installation
20006092 8/08 Rev. 4
MHSC
149 Cleveland Drive • Paris, Kentucky 40361
www.mhsc.com