Filter
Top Products
CL-3
Start and Operate Machine. Complete the Following:
1. COMPLETE COMPONENT TEST.
YES NO
2. CHECK REFRIGERANT AND OIL CHARGE.
YES NO
3. FINISH CHARGING ACCORDING TO THE CHARGING CHART PROVIDED.
YES NO
4. RECORD COMPRESSOR MOTOR CURRENT.
YES NO
5. RECORD CONFIGURATION SETTINGS.
YES NO
6. RECORD OPERATING TEMPERATURES AND PRESSURES.
YES NO
7. PROVIDE OPERATING INSTRUCTIONS TO OWNER’S PERSONNEL.
YES NO
Instruction Time ________ hours.
8. RECORD COMPRESSOR OIL LEVELS AFTER INITIAL RUN. ____________________________________
9. OIL LEVELS ARE STILL WITHIN SIGHT GLASS(ES).
YES NO
OPERATING DATA:
RECORD THE FOLLOWING INFORMATION FROM THE PRESSURES AND TEMPERATURES MODES WHEN
MACHINE IS IN A STABLE OPERATING CONDITION:
PRESSURE/TEMPERATURE
*Readings taken with a digital thermometer.
CIRCUIT A CIRCUIT B
DISCHARGE PRESSURE DP.A DP.B
SUCTION PRESSURE SP.A SP.B
SATURATED CONDENSING TEMP SCT.A SCT.B
SATURATED SUCTION TEMP SST.A SST.B
LIQUID LINE TEMPERATURE*
LIQUID LINE PRESSURE
DISCHARGE LINE TEMPERATURE*
RETURN GAS TEMPERATURE RGT.A RGT.B
RETURN AIR TEMPERATURE* RAT
SUPPLY AIR TEMPERATURE* SAT
OUTDOOR-AIR TEMPERATURE OAT
CONTROL POINT CTPT
PERCENT TOTAL CAPACITY CAP.T