Filter
Top Products
The Ecofan™ GS
Hold Here
Ensure handle is upright
before placing on stove.
Cooling Fins
Thermoelectric Modules
Base
Figure 1.
Important:
The information in this manual contains safe operating instructions and warranty
information. Read this information carefully to learn how to operate and maintain your
Ecofan™ GS properly and to avoid injury or product damage.
Proper Usage
The Ecofan™ GS is designed for use on freestanding gas stoves with surface
temperatures between 65°C to 150°C (150°F to 300°F). Placing your Ecofan™ GS on
a stove top surface with temperatures above 150°C (300°F) will reduce its effectiveness.
It can also damage the unit and void the warranty. Do not use the Ecofan™ GS on a
woodstove.
Handling the Ecofan™ GS
The base of the Ecofan™ GS will get hot when used. Hold the unit firmly by the handle
at all times as shown in Figure 1. Do not touch the base of the Ecofan GS. Never set the
Ecofan™ GS down on an unprotected surface as the hot base could potentially damage
that surface.
Children
Accidents can occur if children are not properly supervised around your stove or
Ecofan GS. Children should be kept away from your stove and never allowed to
handle the Ecofan GS. Never assume that children will remain where you last saw
them. Always use caution and supervise children around your stove.
Placement on the Stove Top
To get maximum performance from your Ecofan™ GS it is important to place it
correctly on the stove top. There are two main factors to consider when
positioning the Ecofan™ GS:
1) Finding the hottest part of the gas stove surface (up to 300
2) Ensuring that cool air can be drawn from behind the Ecofan™ GS over the top,
cooling fins.
150ºC or ºF)
*DANGER:
When in use the base is hot
DO NOT TOUCH!!!