Filter
Top Products
Description:
PHOTO/ION SENSORS
Dual Photoelectric & Ionization sensing
technologies for optimal sensing of
smoke particles produced in both
flaming and smoldering fires.
TWO LATCHING
FEATURES
Alarm Latch: Remembers which unit
initiated an alarm.
Low Battery Latch: Visually Identifies which
unit is in low battery condition.
TWO SILENCE
FEATURES
Alarm Silence: Silence an unwanted
alarm for several minutes.
Low Battery Silence: Temporarily silence
low battery chirp for up to 8 hours.
OPTIPATH 360
TECHNOLOGY
TM
Provides 360 degrees of direct access
to the smoke sensing chambers.
BATTERY POWERED
Powered by two AA alkaline batteries.
CAT.
SA320B
3V (two 1.5V AA) Battery Powered
PHOTO & ION
The BRK Model No. SA320 is a battery powered single station photoelectric and
ionization dual sensor smoke alarm specifically designed for residential and
institutional applications including sleeping rooms of hospitals, hotels, motels,
dormitories and other multi-family dwellings as defined in standard NFPA 101.
Model SA320 complies with UL217, CSFM, NFPA 72, HUD (Note: Certain HUD
battery powered applications may require a 10 Year sealed tamper resistant
battery. This alarm does not meet that requirement. Substitute First Alert
SA340B.), FHA and other agencies that model their codes after the above
agencies. It meets building codes where battery powered photoelectric and
ionization combination smoke alarms are required.
The BRK SA320B is a state-of-the-art battery powered smoke alarm that features
dual photoelectric and ionization smoke sensing technologies. This alarm features
two latching features and two silence features. Alarm Latch: Easily identifies
initiating alarm even after alarm condition has subsided. Low Battery Latch:
Identifies which unit is in low battery condition by blinking the green power light.
Low Battery Silence: Temporarily silence the low battery chirp for up to eight
hours. Alarm Silence: Silence alarm for several minutes. Other features include an
85dB horn, single button test/silence, an easy access battery drawer and dust
cover. OptiPath 360 Technology: Exclusive patented technology provides 360
degrees of direct access to the smoke sensor. Two locking features are provided
to prevent battery theft and/or theft of the unit. Designed for wall or ceiling
mounting. Includes mounting anchors and screws. Installation is quick, easy and
cost effective.
SMOKE
ALARM
Listed to
Standard
UL 217