BRK electronic SA303 Smoke Alarm User Manual


  Open as PDF
of 1
 
I
MPORTANT!
P
LEASE READ CAREFULLYAND SAVE.
T
his user’s manual contains important information about your Smoke
Alarm
’s operation. If you are installing this Smoke Alarm for use by
o
thers, you must leave this manual—or a copy of it—with the end user.
US
ER’S MANUAL
SMOKE ALARM
M0
8-0067-003
J1 0
2/05 Printed in Mexico
M
odels
SA300,
SA3
03
Model SA300
M
odel SA303
With Silence Feature
TABLE OF CONTENTS
F
ire Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Before You Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . . .1
H
ow To Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
O
ptional Locking Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
W
ee
kly Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
If
This Smoke Alarm Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
W
hat To Do In Case Of Fire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Using the Silence Feature (Model SA303 Only) . . . . . . . . . . . . . . . . .4
If
You Suspect A Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
L
imited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Recommended Locations For Smoke Alarms . . . . . . . . . . . . . . . .4-5
Locations To Avoid For Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . .5
Ab
out Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Specia
l Compliance Considerations . . . . . . . . . . . . . . . . . . . . . . . . .6
Limitations Of Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Al
l Rights Reserved. © 2005 BRK Brands, Inc.
B
RK Brands, Inc., 3901Liberty Street Road,Aurora, IL 60504-8122
Consu
mer Affairs: (800) 323-9005 • www.firstalert.com
FIRE SAFETY TIPS
Follow safety rules and prevent hazardous situations: 1) Use smoking
ma
terials properly. Never smoke in bed. 2) Keep matches or lighters
a
way from children; 3) Store flammable materials in proper containers;
4) K
e
e
p electrical appliances in good condition and don’t overload elec-
t
rical circuits; 5) Keep stoves, barbecue grills, fireplaces and chimneys
gr
ease- a
nd debris-free; 6) Never leave anything cooking on the stove
unattended; 7) Keep portable heaters and open flames, like candles,
a
way from flammable materials; 8) Don’t let rubbish accumulate.
Keep alarms clean, and test them weekly. Replace alarms immediately if
they are not working properly. Smoke Alarms that do not work cannot alert
y
ou t
o a fire. Keep at least one working fire extinguisher on every floor, and
an additional one in the kitchen. Have fire escape ladders or other reliable
means of escape from an upper floor in case stairs are blocked.
BE
F
ORE
Y
OU I
N
STALL THIS SMOKE ALARM
IMPORTANT! Read “Recommended Locations for Smoke Alarms” and
“Locations to Avoid for Smoke Alarms” before beginning.This unit moni-
t
or
s t
he a
ir
,
a
nd when smoke reaches its sensing chamber, it alarms. It
can give you more time to escape before fire spreads. This unit can
ONLY give an early warning of developing fires if it is installed, main-
tained and located where smoke can reach it, and where all residents
can hear it, as described in this manual.This unit will not sense gas,
heat, or flame. It cannot prevent or extinguish fires.
Understand The Different Type of Smoke Alarms
Battery powered or electrical? Different Smoke Alarms provide
d
if
f
e
r
e
n
t types of protection. See “About Smoke Alarms” for details.
Know Where To Install Your Smoke Alarms
F
ir
e Sa
f
e
ty
P
r
o
f
essionals recommend at least one Smoke Alarm on every
le
v
el o
f your home, in every bedroom, and in every bedroom hallway or
separate sleeping area. See “Recommended Locations For Smoke
Alarms
” and “Locations To Avoid For Smoke Alarms” for details.
Know What Smoke Alarms Can and Can’t Do
A Smoke Alarm can help alert you to fire, giving you precious time to
e
sca
pe
.
I
t ca
n on
l
y sou
nd a
n a
larm once smoke reaches the sensor.
Se
e
“
L
imitations of Smoke Alarms” for details.
Check
Y
our L
o
ca
l Bui
ldi
n
g Codes
T
h
is Smo
k
e
Alarm is d
e
sig
ned to be used in a typical single-family
home
. It alone will not meet requirements for boarding houses,
apartment buildings, hotels or motels. See “Special Compliance
Considerations”
for details.
WEEKLY TESTING
NEVER use an open flame of any kind to test this unit. You might
accidentally damage or set fire to the unit or to your home.The
bui
lt-i
n test switch accurately tests the unit’s operation as required
by Underwriters Laboratories, Inc. (UL). If you choose to use an
aerosol smoke product to test the Smoke Alarm, be certain to use
one tha
t has been L
is
ted t
o U
nder
writers Laboratories, Inc. Safety
Standards, and use it only as directed. Use of non-UL Listed prod-
ucts or improper use of UL Listed products may affect the Smoke
Alarm’s sensitivity.
It is important to test this unit every week to make sure it is working
properly.
Using the test button is the recommended way to test this
Smo
k
e Alarm. Press and hold the test button on the cover of the unit until
the alarm sounds (the unit may continue to alarm for a few seconds after
you release the button). If it does not alarm, make sure the unit is receiv-
i
ng po
w
e
r a
nd t
est it again. If it still does not alarm, replace it immediate-
ly. During testing you will hear a loud, repeating horn pattern: 3 beeps,
pause, 3 beeps, pause.
HOW TO INSTALL THIS SMOKE ALARM
T
HE PARTS OF THIS SMOKE ALARM
FOLLOW THESE SIMPLE STEPS!
T
ools you will need:
• P
encil • Drill with 3/16” (5 mm) drill bit
• H
ammer • Standard Flathead screwdriver
1
. Remove the mounting bracket from the Smoke Alarm base. Hold the
mou
nting bracket against the ceiling (or wall) and make a mark at
t
he center of each of the mounting slots with a pencil.
2. Put the unit where it won’t get covered with dust when you drill the
mou
nting holes.
3
. Using a 3/16” (5 mm) drill bit, drill a hole through each pencil mark.
4
. Insert the plastic screw anchors (in the plastic bag with screws) into
the holes.Tap the screw anchors gently with a hammer, if necessary,
u
ntil they are flush with the ceiling or wall.
5
. Tighten the screws (provided) into the screw anchors.
All First Alert
®
Smoke Alarms conform to regulatory requirements,
i
ncluding UL217 and are designed to detect particles of combustion.
Smoke particles of varying number and size are produced in all fires.
I
onization technology is generally more sensitive than photoelectric
technology at detecting small particles, which tend to be produced
i
n gr
ea
ter amounts by flaming fires, which consume combustible
ma
terials rapidly and spread quickly. Sources of these fires may include
paper burning in a wastebasket, or a grease fire in the kitchen.
P
hotoelectric technology is generally more sensitive than ionization
technology at detecting large particles, which tend to be produced
i
n greater amounts by smoldering fires, which may smolder for hours
be
f
or
e bursting into flame. Sources of these fires may include cigarettes
burning in couches or bedding.
F
or maximum protection, use both types of Smoke Alarms on each
le
v
el and i
n e
v
er
y bedr
oom of your home.
•
T
his unit w
i
ll not alert hearing impaired residents. It is recom-
mended that you install special units which use devices like
fl
ashi
n
g strobe lights to alert the hearing impaired.
• Do not connect this unit to any other alarm or auxiliary
de
v
i
ce
.
I
t is a s
i
n
g
le-station unit that cannot be linked to other
de
v
i
ces.
Connecting anything else to this unit may prevent it
from working properly.
• Unit will not operate without battery power.The Smoke Alarm
cann
o
t w
or
k until you install the battery in the correct
po
sition (Match “+” to “+” and “-” to “-”).
• This Smoke Alarm has a battery drawer which resists closing
unless a battery is installed.This warns you the unit will not
operate without a battery.
•
D
o n
ot install this unit over an electrical junction box. Air cur-
ren
t
s ar
ound junction boxes can prevent smoke from reaching
the s
ens
i
ng chamber and prevent the unit from alarming. Only
A
C po
w
ered units are intended for installation over junction
b
o
x
es.
•
Do not stand too close to the unit when the alarm is sounding.
I
t is l
oud t
o w
ake you in an emergency. Exposure to the horn at
cl
o
s
e ran
ge may harm your hearing.
•
D
o n
ot paint over the unit. Paint may clog the openings to the
s
ens
i
ng chamber and prevent the unit from operating properly.
1 2 3
6
. Activate the battery.With the battery
com
partment open, install the battery
so the terminals on the battery match
t
he terminals on the Smoke Alarm.
M
atch “+” to “+” and “-” to “-.” Push
the battery in until it snaps in securely
a
nd cannot be shaken loose.
I
f the battery is not snapped in completely, the unit cannot receive
b
attery power. The Smoke Alarm may beep briefly when you install
the battery—this is normal.
7
.
P
osition the base of the Smoke Alarm over the mounting bracket and
t
urn.The Alarm can be positioned over the bracket every 60°.Turn
the Smoke Alarm clockwise (right) until the unit is in place.
8
. Test the Smoke Alarm. See “Weekly Testing.”
REGULAR MAINTENANCE
This unit has been designed to be as maintenance free as possible, but
t
he
re are a few simple things you must do to keep it working properly.
Use only the replacement batteries listed below.The unit may not
operate properly with other batteries. Never use rechargeable
b
a
t
teries s
i
nce they may not provide a constant charge.
• Test it at least once a week.
•
C
lea
n t
he Smoke Alarm at least once a month; gently vacuum the
outside of the Smoke Alarm using your household vacuum’s soft
brush attachment.A can of clean compressed air (sold at computer
or o
f
fice su
p
p
l
y s
t
ores) may also be used. Follow manufacturer
i
nstructions for use.Test the Smoke Alarm. Never use water, cleaners
or solvents since they may damage the unit.
•
I
f t
he Smo
k
e
Alarm be
comes contaminated by excessive dirt, dust
and/or grime, and cannot be cleaned to avoid unwanted alarms,
replace the unit immediately.
• Relocate the unit if it sounds frequent unwanted alarms. See
“Locations to Avoid for Smoke Alarms” for details.
• When the battery becomes weak, the Smoke Alarm unit will “chirp”
about once a minute (the low battery warning). This low battery
warning should last for 30 days, but you should replace the battery
immediately to continue your protection.
Choosing a replacement battery:
Your Smoke Alarm requires one standard 9V battery.The following
batteries are acceptable as replacements: Duracell #MN1604, (Ultra)
#MX1
6
04; E
veready (Energizer) #522.You may also use a Lithium
b
a
tt
e
r
y l
ike the Ultralife U9VL-J for longer service life between battery
changes.
These batteries are available at many local retail stores.
Continued...
T
he Parts of This Unit
1
. Mounting Bracket
2
. Mounting Slots and Screws
3. Locking Pins (break out of bracket)
4
. Latch to Open Battery Compartment
5. Swing-Out Battery Compartment
To remove the mounting bracket
from the Smoke Alarm base, hold the
Smoke Alarm base firmly and twist the
mounting bracket counterclockwise.
1
2
3
2
5
4
3
L
IMI
TED WARRANTY
BRK Brands, Inc., ("BRK") the maker of First Alert
®
brand products
w
arrants that for a period of ten years from the date of purchase, this
pr
oduct will be free from defects in material and workmanship. BRK, at
its option, will repair or replace this product or any component of the
pr
oduct found to be defective during the warranty period. Replacement
will be made with a new or remanufactured product or component. If the
product is no longer available, replacement may be made with a similar
pr
oduct of equal or greater value. This is your exclusive warranty.
T
his warranty is valid for the original retail purchaser from the date of
i
nitial retail purchase and is not transferable. Keep the original sales
receipt. Proof of purchase is required to obtain warranty performance.
B
RK dealers, service centers, or retail stores selling BRK products do
no
t have the right to alter, modify or any way change the terms and
conditions of this warranty.
T
his warranty does not cover normal wear of parts or damage resulting
from any of the following: negligent use or misuse of the product, use on
i
mproper voltage or current, use contrary to the operating instructions,
d
isassembly, repair or alteration by anyone other than BRK or an author-
ized service center. Further, the warranty does not cover Acts of God,
such as fir
e, flood, hurricanes and tornadoes or any batteries that are
i
ncluded with this unit.
B
RK shall not be liable for any incidental or consequential damages
ca
used by the breach of any express or implied warranty. Except to the
extent prohibited by applicable law, any implied warranty of merchantabil-
ity or fit
ness for a particular purpose is limited in duration to the duration
o
f the above warranty. Some states, provinces or jurisdictions do not
allow the exclusion or limitation of incidental or consequential damages
or l
imitations on how long an implied warranty lasts, so the above limita-
tions or exclusion may not apply to you.This warranty gives you specific
legal rights, and you may also have other rights that vary from state to
s
tate or province to province.
How to Obtain Warranty Service
S
er
v
ice:
I
f se
r
vice is required, do not return the product to your retailer.
In order to obtain warranty service, contact the Consumer Affairs
D
ivision at 1-800-323-9005, 7:30 AM - 5:00 PM Central Standard Time,
M
onday through Friday.To assist us in serving you, please have the
model number and date of purchase available when calling.
3
03 N
elson
A
venue, Neosho, MO 64850-8806.
Battery: BRK Brands, Inc. make no warranty, express or implied, written
or or
al, including that of merchantability or fitness for any particular
p
urpose w
it
h r
e
spe
ct t
o b
attery.
Sm
o
ke Alarms Purchased with Lithium Battery:
B
R
K Brands, Inc.
warrants the enclosed battery to be free from defects in materials and
w
orkmanship under normal use and service for a period of ten years
f
rom the date of purchase.
IF YOU SUSPECT A PROBLEM
Smo
ke Alarms may not operate properly because of dead, missing or
weak batteries, a build-up of dirt, dust or grease on the Smoke Alarm
cover, or installation in an improper location. Clean the Smoke Alarm as
d
escribed in “Regular Maintenance,” and install a fresh battery, then test
the Smoke Alarm again. If it fails to test properly when you use the test
b
utton, or if the problem persists, replace the Smoke Alarm immediately.
•
If you hear a “chirp” once a minute, replace the battery.
•
If you experience frequent non-emergency alarms (like those
caus
ed by cooking smoke), try relocating the Smoke Alarm.
•
If the alarm sounds when no smoke is visible, try cleaning or
rel
ocating the Smoke Alarm.The cover may be dirty.
•
If the alarm does not sound during testing, try installing a new
b
attery, and make sure it is snapped in securely.
I
f the Smoke Alarm is still not operating properly, and it is still under
w
arranty, please see “How to Obtain Warranty Service” in the Limited
Warranty below.
D
o not try fixing the alarm yourself – this will void your warranty!
RECOMMENDED LOCATIONS FOR SMOKE ALARMS
I
ns
ta
l
l
ing Smoke Alarms in Single-Family Residences
T
he N
a
t
iona
l Fire Protection Association (NFPA), recommends one
Smoke Alarm on every floor, in every sleeping area, and in every bed-
room. In new construction, the Smoke Alarms must be AC powered and
i
n
t
e
r
con
ne
ct
ed. See “Agency Placement Recommendations” for details.
F
or ad
ditional coverage, it is recommended that you install a Smoke
Alarm in all rooms, halls, storage areas, finished attics, and basements,
where temperatures normally remain between 40˚ F (4˚ C) and 100˚ F
(38˚ C). Make sure no door or other obstruction could keep smoke from
reaching the Smoke Alarms.
More specifically,install Smoke Alarms:
•
On every level of your home, including finished attics and basements.
• Inside every bedroom, especially if people sleep with doors closed.
• In the hall near every sleeping area. If your home has multiple sleep-
i
ng ar
eas
, install a unit in each.
• If a hall is over 40 feet (12 meters) long, install an alarm at each end.
•
A
t the top of the first-to-second floor stairway, and at bottom of
basement stairway.
Spe
cific requirements for Smoke Alarm installation vary from state to
state and from region to region. Check with your local Fire Department
for current requirements in your area.
It is recommended AC or AC/DC
units be interconnected for added protection.
INSTALLING SMOKE ALARMS IN MOBILE HOMES & RVS
F
or minimum security install one Smoke Alarm as close to each sleeping
area as possible. For more security, put one unit in each room. Many
older mobile homes (especially those built before 1978) have little or no
i
nsulation. If your mobile home is not well insulated, or if you are unsure
of the amount of insulation, it is important to install units on inside walls
only. Smoke Alarms should be installed where temperatures normally
r
emain between 40˚ F (4˚ C) and 100˚ F (38˚ C).
W
ARNING: Test units
used in RVs after the vehicle has been in storage, before every trip,
and once a week while in use. Failure to test units used in RVs as
described may remove your protection.
This equipment should be installed in accordance with NFPA (National Fire
Protection Association) 72 and
101.National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269-9101. Additional local building and
regulatory codes may apply in your area.Always check compliance
requirements before beginning any installation.
A
GENCY PLACEMENT RECOMMENDATIONS
NFPA 72 (National Fire Code)
Smo
ke Alarms shall be installed in each separate sleeping room, outside
each sle
eping area in the immediate vicinity of the bedrooms and on
each additional story of the family living unit, including basements and
e
xcluding crawl spaces and unfinished attics.
I
n new construction,Alarms shall be so arranged that operation of any
one
Alarm shall cause the operation of all Alarms within the dwelling.
Sm
oke Detection-Are More Smoke Alarms Desirable?
T
he required
n
umber of Smoke Alarms might not provide reliable early warning pro-
t
ection for those areas separated by a door from the areas protected by
t
he required Smoke Alarms. For this reason, it is recommended that the
householder consider the use of additional Smoke Alarms for those
ar
eas for increased protection.The additional areas include the base-
me
nt, bedrooms, dining room, furnace room, utility room, and hallways
not protected by the required Smoke Alarms.The installation of Smoke
Alarms i
n kitchens, attics (finished or unfinished), or garages is not
norma
lly recommended, as these locations occasionally experience
conditions that can result in improper operation.
California State Fire Marshal (CSFM)
Early warning detection is best achieved by the installation of fire detec-
t
ion equipment in all rooms and areas of the household as follows: A
Smo
ke Alarm installed in each separate sleeping area (in the vicinity, but
outside bedrooms), and Heat or Smoke Alarms in the living rooms, dining
r
ooms, bedrooms, kitchens, hallways, finished attics, furnace rooms, clos-
e
ts, utility and storage rooms, basements, and attached garages.
L
OCATIONS TO AVOID FOR SMOKE ALARMS
For best performance, it is recommended you AVOID installing
Sm
oke Alarms in these areas:
•
Where combustion particles are produced. Combustion particles
f
orm w
hen something burns.Areas to avoid include poorly ventilated
kitchens, garages, and furnace rooms. Keep units at least 20 feet
(6 me
ters) from the sources of combustion particles (stove, furnace,
w
a
ter heater, space heater) if possible. In areas where a 20-foot
(6 meter) distance is not possible – in modular, mobile, or smaller
home
s, for example – it is recommended the Smoke Alarm be
p
laced as far from these fuel-burning sources as possible. The
placement recommendations are intended to keep these Alarms at
a r
easonable distance from a fuel-burning source, and thus reduce
“
unwanted” alarms. Unwanted alarms can occur if a Smoke Alarm is
p
lace
d directly next to a fuel-burning source. Ventilate these areas
as m
uch as possible.
•
In air streams near kitchens. Air currents can draw cooking smoke
into the sensing chamber of a Smoke Alarm near the kitchen.
•
In very damp, humid or steamy areas, or directly near bathrooms with
sho
w
e
r
s
.
K
eep units at least 10 feet (3 meters) away from showers,
saunas, dishwashers, etc.
•
Where the temperatures are regularly below 40˚ F (4˚ C) or above
1
00˚ F (38˚C), including unheated buildings, outdoor rooms, porches,
or unfinished attics or basements.
•
In very dusty, dirty, or greasy areas. Do not install a Smoke Alarm
d
ir
e
ctly over the stove or range. Keep laundry room Smoke Alarms
free of dust or lint.
• Near fresh air vents, ceiling fans, or in very drafty areas. Drafts can
b
low smoke away from the unit, preventing it from reaching the
se
nsi
ng cha
m
be
r
.
•
In insect infested areas. Insects can clog openings to the sensing
chamber and cause unwanted alarms.
•
L
e
ss t
ha
n
1
2 i
nches (305mm) away from fluorescent lights. Electrical
“
noise” can interfere with the sensor.
• In “dead air” spaces.“Dead air” spaces may prevent smoke from
reaching the Smoke Alarm.
A
voiding Dead Air Spaces
“
Dead air” spaces may prevent smoke from reaching the Smoke Alarm.
T
o a
v
o
id d
ead a
ir spaces, follow the installation recommendations below.
O
n ceilings,
i
nstall Smoke Alarms as close to the center of the ceiling as
possi
b
le
.
I
f t
his is not possible, install the Smoke Alarm at least 4 inches
(102 mm) from the wall or corner.
F
or w
a
l
l m
oun
ting
(if a
l
l
o
w
e
d by building codes), the top edge of Smoke
Alarms should be placed between 4 and 12 inches (102 and 305 mm)
from the wall/ceiling line, below typical “dead air” spaces.
On a peaked, gabled, or cathedral ceiling, install the first Smoke Alarm
within 3 feet (0.9 meters) of the peak of the ceiling, measured horizontally.
Ad
d
it
iona
l Smo
k
e
Alarms ma
y be r
equired depending on the length,
a
ng
le
, etc. of the ceiling's slope. Refer to NFPA 72 for details on require-
ments for sloped or peaked ceilings.
S
PECIAL COMPLIANCE CONSIDERATIONS
This Smoke Alarm alone is not a suitable substitute for complete fire
d
etection systems in places housing many people—like apartment
buildings, condominiums, hotels, motels, dormitories, hospitals, long-
term health care facilities, nursing homes, day care facilities, or group
home
s of any kind—even if they were once single-family homes. It is not
a suitable substitute for complete fire detection systems in warehouses,
industrial facilities, commercial buildings, and special-purpose non-resi-
d
ential buildings which require special fire detection and alarm systems.
D
epending on the building codes in your area, this Smoke Alarm may
be used to provide additional protection in these facilities.
The following information applies to all four building types below:
I
n new construction, most building codes require the use of AC or AC/DC
powered Smoke Alarms only. In existing construction,AC,AC/DC, or DC
po
wered Smoke Alarms can be used as specified by local building
cod
es. Refer to NFPA101(Life Safety Code) or NFPA 72 (National Fire
Alarm Code), local building codes, or consult your Fire Department for
d
etailed fire protection requirements in buildings not defined as “house-
ho
lds.”
1. Single-Family Residence:
Si
ngle family home, townhouse. It is recommended Smoke Alarms be
i
nstalled on every level of the home, in every bedroom, and in each
be
droom hallway.
2.
Multi-Family or Mixed Occupant Residence:
Apartment building, condominium.This Smoke Alarm is suitable for use
i
n individual apartments or condos, provided a primary fire detection
s
ystem already exists to meet fire detection requirements in common
areas like lobbies, hallways, or porches. Using this Smoke Alarm in
com
mon areas may not provide sufficient warning to all residents or
me
et local fire protection ordinances/regulations.
3.
Institutions:
H
ospitals, day care facilities, long-term health care facilities. This Smoke
Alarm is su
itable for use in individual patient sleeping/resident rooms,
pr
ovided a primary fire detection system already exists to meet fire
d
etection requirements in common areas like lobbies, hallways, or
por
ches. Using this Smoke Alarm in common areas may not provide
suf
ficient warning to all residents or meet local fire protection ordinances
/r
egulations.
4.
Hotels and Motels:
Also boarding houses and dormitories.This Smoke Alarm is suitable for
use i
nside individual sleeping/resident rooms, provided a primary fire
d
etection system already exists to meet fire detection requirements in
common areas like lobbies, hallways, or porches. Using this Smoke Alarm
i
n common areas may not provide sufficient warning to all residents or
me
et local fire protection ordinances/regulations.
LIMITATIONS OF SMOKE ALARMS
Smoke Alarms have played a key role in reducing deaths resulting from
home fires worldwide. However, like any warning device, Smoke Alarms
ca
n only work if they are properly located, installed, and maintained, and
if smoke reaches them. They are not foolproof.
Smoke alarms may not waken all individuals. Practice the escape plan
at least twice a year, making sure that everyone is involved – from kids to
gr
andparents.Allow children to master fire escape planning and practice
be
f
ore holding a fire drill at night when they are sleeping. If children or
others do not readily waken to the sound of the smoke alarm, or if there
ar
e infants or family members with mobility limitations, make sure that
someone is assigned to assist them in fire drill and in the event of an
emergency. It is recommended that you hold a fire drill while family
me
mbers are sleeping in order to determine their response to the sound
of the smoke alarm while sleeping and to determine whether they may
need assistance in the event of an emergency.
Smoke Alarms cannot work without power. Battery operated units
ca
nnot work if the batteries are missing, disconnected or dead, if the
w
r
ong ty
pe o
f b
a
tteries are used, or if the batteries are not installed
correctly. AC units cannot work if the AC power is cut off for any reason
(ope
n fuse or circuit breaker, failure along a power line or at a power
station, electrical fire that burns the electrical wires, etc.). If you are
conce
rne
d a
bout the limitations of battery or AC power, install both
ty
pes of units.
Sm
o
k
e Alarms cannot detect fires if the smoke does not reach
them. Smoke from fires in chimneys or walls, on roofs, or on the other
sid
e of closed doors may not reach the sensing chamber and set off
t
he alarm.That is why one unit should be installed inside each bedroom
or sleeping area—especially if bedroom or sleeping area doors are
cl
ose
d a
t n
ig
h
t—and in the hallway between them.
Smoke Alarms may not detect fire on another floor or area of the
h
ome
.
F
or e
x
a
m
ple, a stand-alone unit on the second floor may not
detect smoke from a basement fire until the fire spreads.This may not
give you enough time to escape safely.That is why recommended mini-
mum protection is at least one unit in every sleeping area, and every
be
d
room on every level of your home. Even with a unit on every floor,
stand-alone units may not provide as much protection as interconnected
units, especially if the fire starts in a remote area. Some safety experts
recommend installing interconnected AC powered units with battery
b
ack-up (see “About Smoke Alarms”) or professional fire detection sys-
t
e
ms
,
so if one unit senses smoke, all units alarm. Interconnected units
may provide earlier warning than stand-alone units since all units alarm
when one detects smoke.
Smoke Alarms may not be heard. Though the alarm horn in this unit
meets or exceeds current standards, it may not be heard if: 1) the unit
is located outside a closed or partially closed door, 2) residents recently
consu
med alcohol or drugs, 3) the alarm is drowned out by noise from
stereo,TV, traffic, air conditioner or other appliances, 4) residents are
hearing impaired or sound sleepers. Special purpose units, like those
with visual and audible alarms, should be installed for hearing impaired
r
e
sid
e
n
t
s
.
Smoke Alarms may not have time to alarm before the fire itself
caus
es dama
ge
,
i
n
j
ur
y
,
or death, since smoke from some fires may
n
o
t rea
ch the unit immediately. Examples of this include persons
smoking in bed, children playing with matches, or fires caused by
v
i
olent explosions resulting from escaping gas.
Smoke Alarms are not foolproof.
Like any electronic device, Smoke
Alarms ar
e mad
e of components that can wear out or fail at any time.
You must test the unit weekly to ensure your continued protection.
Smoke Alarms cannot prevent or extinguish fires. They are not a
su
b
s
t
it
ute for property or life insurance.
Smoke Alarms have a limited life. The unit should be replaced
i
m
me
d
ia
tely if it is not operating properly. You should always replace a
Smoke Alarm after 10 years from date of purchase.Write the purchase
date on the space provided on back of unit.
F
ir
s
t Alert
®
is a r
e
g
istered trademark of the First Alert Trust.
4 5 6
ABOU
T
S
MO
KE
ALARM
S
B
a
t
ter
y (D
C) opera
ted Sm
o
k
e
Al
arms:
P
r
o
v
id
e pr
o
t
e
ct
ion e
ven when
ele
ct
r
icity f
ails, provided the batteries are fresh and correctly installed.
Units are easy to install, and do not require professional installation.
A
C po
w
ered Sm
oke Alarms:
C
a
n be i
n
terconnected so if one unit
senses smoke, all units alarm.They do not operate if electricity fails.
A
C w
ith battery (DC) back-up:
w
i
ll operate if electricity fails, provided
the batteries are fresh and correctly installed.AC and AC/DC units must
be i
nstalled by a qualified electrician.
Smoke Alarms for Solar or Wind Energy users and battery backup
po
wer systems: A
C powered Smoke Alarms should only be operated
w
it
h t
rue or p
ur
e si
ne wave inverters. Operating this Smoke Alarm with
most battery-powered UPS (uninterruptible power supply) products or
square wave or “quasi sine wave” inverters will damage the Alarm.
I
f y
ou ar
e no
t sur
e a
bout y
our i
n
v
erter or UPS type, please consult with
t
he ma
n
ufacturer to verify.
Sm
o
k
e
Al
arms f
or the heari
n
g i
mpaired:
Spe
cia
l p
urpose Smo
k
e
Alarms shou
ld be i
ns
talled for the hearing impaired.They include a visu-
a
l alarm and an audible alarm horn, and meet the requirements of the
Ame
ricans With Disabilities Act. Can be interconnected so if one unit
senses smoke, all units alarm.
Sm
oke alarms are not to be used with detector guards
u
nless the
combination has been evaluated and found suitable for that purpose.
All these Smoke Alarms are designed to provide early warning of fires if
located, installed and cared for as described in the user’s manual, and if
smoke reaches them. If you are unsure which type of Smoke Alarm to
install, refer to Chapter 2 of the National Fire Protection Association
(NFPA) Standard 72 (National Fire Alarm Code) and NFPA101 (Life Safety
Code). National Fire Protection Association, One Batterymarch Park,
Q
u
i
ncy, MA 02269-9101. Local building codes may also require specific
u
n
it
s i
n ne
w construction or in different areas of the home.
BEDROOM
BEDROOM
HALL
LIVING ROOM KITCHEN
FINISHED BASEMENT
REQUIRED TO MEET
NFPA RECOMMENDATIONS
RECOMMENDED FOR
ADDITIONAL PROTECTION
BEDROOM
BEDROOM
KITCHEN
LIVING ROOM
DINING ROOM
MULTI-STORY RESIDENCE
SINGLE-STORY RESIDENCE, APARTMENT,
MOBILE HOME
KEY:
EXISTING HOMES
SMOKE ALARMS WITH SILENCE
FEATURES RECOMMENDED FOR
ADDITIONAL PROTECTION
BEDROOM
BEDROOM
HALL
LIVING ROOM KITCHEN
FINISHED BASEMENT
BEDROOM
BEDROOM
LIVING ROOM
D
INING ROOM
MULTI-STORY RESIDENCE
SINGLE-STORY RESIDENCE, APARTMENT,
MOBILE HOME
EXISTING HOMES
K
ITCHEN
REQUIRED TO
MEET NFPA
RECOMMENDATIONS
RECOMMENDED
FOR ADDITIONAL
PROTECTION
KEY:
SMOKE ALARMS WITH SILENCE
FEATURES RECOMMENDED FOR
ADDITIONAL PROTECTION
INTERCONNECTED
AC OR AC/DC
SMOKE ALARMS
BEDROOM
BEDROOM
HALL
LIVING ROOM KITCHEN
FINISHED BASEMENT
REQUIRED TO
MEET NFPA
RECOMMENDATIONS
RECOMMENDED
FOR ADDITIONAL
PROTECTION
BEDROOM
BEDROOM
LIVING ROOM
DINING ROOM
MULT I-STORY RESIDENCE
SINGLE-STORY RESIDENCE, APARTMENT,
MOBILE HOME
KEY:
NEW CONSTRUCTION
SMOKE ALARMS
WITH SILENCE
FEATURES
RECOMMENDED
FOR ADDITIONAL
PROTECTION
KITCHEN
IF
T
HIS SMOKE ALARM SOUNDS
RESPONDING TO AN ALARM
D
uri
n
g an alarm, you will hear a loud, repeating horn pattern:
3 beeps, pause, 3 beeps, pause.
•
If the unit alarms and you are not testing the unit, it is warning
you of a potentially dangerous situation that requires your
immediate attention. NEVER ignore any alarm. Ignoring the
a
l
arm ma
y result i
n injury or death.
•
N
e
v
er rem
o
ve the batteries from a battery operated Smoke Alarm
to stop an unwanted alarm (caused by cooking smoke, etc.).
R
em
o
v
i
ng batteries disables the alarm so it cannot sense smoke,
and removes your protection. Instead open a window or fan the
smoke away from the unit. The alarm will reset automatically.
• If the unit alarms get everyone out of the house immediately.
Printed in Mexico M08-0067-003 J1 02/05
+
–
OPTIONAL LOCKING FEATURES
T
he locking features are designed to discourage unauthorized removal of the battery or Alarm. It is not necessary to activate the locks in
s
ingle-family households where unauthorized battery or Alarm removal is not a concern.
T
hese Smoke Alarms have two separate locking features: one to lock the battery compartment, and the other to lock the
Smoke Alarm to the mounting bracket. You can choose to use either feature independently, or use them both.
T
ools you will need:
• N
eedle-nose pliers or utility knife • Standard Flathead screwdriver.
Bo
t
h locking features use locking pins, which are molded into the mounting bracket. Using needle nose pliers or a utility knife,
r
emove one or both pins from the mounting bracket, depending on how many locking features you want to use.
T
o permanently remove either lock, insert a flathead screwdriver between the locking pin and the lock, and pry the pin out of the lock.
Locking Pin
TO LOCK THE BATTERY COMPARTMENT
D
o not lock the battery compartment until you have installed the
battery and tested the unit.
1
. Push and hold test button until the alarm sounds:
3 be
eps, pause, 3 beeps, pause.
If the unit does n
ot alarm during testing,
DO NOT lock the battery compartment!
I
nstall a new battery and test again. If the
Sm
oke Alarm still does not alarm, replace it
immediately.
2. Using needle-nose pliers or a
ut
i
l
ity knife, detach one locking
p
in from the mounting bracket.
3
. Push the locking pin through
the hole near the battery
d
rawer on the back of the
Smo
ke Alarm.
TO UNLOCK THE BATTERY COMPARTMENT
1
. Remove the Smoke Alarm from the mounting bracket. If the unit is
locked to the bracket, see the section “To Unlock the Mounting
Br
acket.”
2
. Insert a flathead screwdriver under the
head o
f the locking pin, and gently pry
it out o
f the battery compartment lock.
(I
f you plan to relock the battery
compartment, save the locking pin.)
3. To relock the battery compartment, close the battery door and
r
einsert locking pin in lock.
4. Reattach the Smoke Alarm to the mounting bracket.
W
he
n r
eplacing the battery, always test the Smoke Alarm before
r
elocking the battery compartment.
TO UNLOCK THE MOUNTING BRACKET
1
. Insert a flathead screwdriver between the
mounting bracket pin and the mounting
br
acket.
2. Pry the Smoke Alarm
a
w
ay from the
bracket by turning
both the screwdriver
a
nd the Smoke Alarm
cou
n
terclockwise
(le
f
t) a
t the same
time.
TO LOCK THE MOUNTING BRACKET
1. Using needle-nose pliers, detach one locking pin from mounting bracket.
2. Insert the locking pin into the lock located on the pivoting hinge of the
battery door.
3. When you attach the Smoke Alarm to the mounting bracket, the locking
p
in’s head will fit into a notch on the bracket.
WHAT TO DO IN CASE OF FIRE
• Don’t panic; stay calm. Follow your family escape plan.
•
Ge
t out o
f the house as quickly as possible. Don’t stop to
get dressed or collect anything.
• Feel doors with the back of your hand before opening them.
I
f a d
oor is coo
l
, open it slowly. Don’t open a hot door. Keep doors
and windows closed, unless you must escape through them.
•
Cover your nose and mouth with a cloth (preferably damp).
Take short, shallow breaths.
• Meet at your planned meeting place outside your home,
a
nd do a head count to make sure everybody got out safely.
•
Call the Fire Department as soon as possible from outside.
Give your address, then your name.
•
Never go back inside a burning building for any reason.
• Contact your Fire Department for ideas on making your home safer.
Alarms have various limitations. See "Limitations of Smoke Alarms"
for details.
R
EGULAR MAINTENANCE, Continued
Actual battery service life depends on the Smoke Alarm and the environ-
ment in which it is installed.All the batteries specified above are accept-
a
b
le r
eplacement batteries for this unit. Regardless of the manufacturer’s
suggested battery life, you MUST replace the battery immediately once
the unit starts “chirping” (the “low battery warning”).
USING THE SILENCE FEATURE (MODEL SA303 ONLY)
The Silence Feature can temporarily quiet an unwanted alarm for up to
1
0 minutes.To use this feature, press the “Test/Silence” button.The
Alarm remains functional. The LED will flash every 10 seconds (for up
to 10 minutes) to remind you the alarm has been silenced.The flashing
L
ED will stop when the unit returns to normal operation.
The Silence Feature does not disable the unit—it makes it temporarily
less s
ensitive to smoke. For your safety,if smoke around the unit is
dens
e enough to suggest a potentially dangerous situation, it will stay
i
n alarm, or may re-alarm quickly. If you do not know the source of the
sm
oke, do not assume it is an unwanted alarm. Not responding to an
alarm can result in property loss, injury or death.
Al
arm Base
1. Battery Compartment
2
.Test button (Model SA300)
2.Test/Silence button (Model SA303)
This unit is designed to be mounted on
the ceiling, or on the wall if necessary.
D
O NOT attach this Alarm to an electrical junction box.
A
ttachment to an electrical box may impair the Alarm’s operation.
Attach directly to wallboard or flat wall or ceiling surface.