Description:
ELECTROCHEMICAL
CO SENSOR
Most accurate technology available for
detecting carbon monoxide as compared to
other sensing technologies.
LATCHING ALARM
INDICATOR
Remembers which unit initiated an alarm.
INTELLIGENT SENSING
TECHNOLOGY
Microprocessor controlled to reduce
the number nuisance alarms.
END OF LIFE SIGNAL
Provides audible notice when alarm
needs to be replaced.
TWO LOCKING
FEATURES
Pins lock battery drawer and/or alarm to
base. Perfect for apartment, dormitory or
hotel applications.
CAT.
CO5120BN
120V AC, 60Hz Wire-in
with 9V Battery Backup
The BRK Brands, Inc. Cat. No CO5120BN is a wire-in, 120 VAC 60Hz single and /
or multiple station carbon monoxide alarm specifically designed for residential
and institutional applications including sleeping rooms of hospitals, hotels,
motels, dormitories and other multi-family dwellings as defined in standard NFPA
101. Model CO5120BN complies with UL2034, NFPA 720, HUD, FHA and other
agencies that model their codes after the above agencies. They meet building
codes where AC/DC carbon monoxide alarms are required either separately or in
combination. The alarms are interconnectable up to 18 devices, of which 12 can
be smoke alarms.
The BRK CO5120BN features an electrochemical carbon monoxide sensor, an
85dB horn, 9V battery back-up, an End of Life and a silence feature. “Intelligent
Sensing Technology” is designed to reduce nuisance alarms. “Latching Alarm
Indicator” remembers which unit initiated an alarm. When interconnected in a
series, the unit that triggered the alarm will store in memory or “latch” the
information and begin to flash the LED indicator 2 seconds on, 2 seconds off. A
single button test/silence button eliminates confusion. Battery installation and
removal can occur while the unit is mounted to the ceiling or wall via the side
load battery compartment. Other Contractor Preferred features include a dust
cover to keep alarm clean during construction, keyhole slots in the mounting
bracket eliminate the need to remove the electrical box screws for installation.
Two locking features are provided to prevent battery theft and/or theft of the unit.
Connection toAC power is made with a“Quick-Connect” wiring harness.
Installation is quick, easy and cost
effective.
CARBON
MONOXIDE
ALARM
CO
7